MOORING FLOATING OIL RIGS - NORTHWEST AUSTRALIA

Abstract

B.O.C. of Australia Limited has drilled five wells on the continental shelf of Northwest Australia using floating type oil exploration vessels. To date three different methods of anchoring have been used in the Group's operations depending on the type of sea bottom encountered and the progress of technology.

On coral and shoal areas south of Timor good anchoring ground has been located. Both drilling exploration vessels S.S. "Glomar Tasman" and the "Investigator," a drilling barge, have been anchored in this area using all chain anchor systems.

Three wells have been drilled in an area approximately 100 miles northeast of Barrow Island where surveys revealed smooth limestone sea beds of such hardness that conventional ships anchors could not penetrate the surface to obtain a firm hold. Anchor pilings to hold the "Glomar Tasman" have been successfully installed on the sea floor at two drill sites using a small vessel, M.V. "Nyhavns Rose," of 400 tons. These piles were drilled into the sea bed using a drill string and a power swivel at the surface, and utilizing a counter weight system to allow for vessel heave. At the first locality, in 180 feet of water, divers were used to manually connect the heavy pendant wires to the anchor piles. At the second location a diverless method of installing drilled in anchor piles with chain mooring pendants attached was designed and successfully used in a water depth of 265 feet.