Register      Login
The APPEA Journal The APPEA Journal Society
Journal of Australian Energy Producers
RESEARCH ARTICLE

Challenges in modelling of hydraulic fracturing in low-permeability coal seams with complex cleat networks and stress regimes

Mohammad Ali Aghighi A C , Raymond Johnson Jr. A and Chris Leonardi B
+ Author Affiliations
- Author Affiliations

A School of Chemical Engineering and UQ Centre for Coal Seam Gas, University of Queensland, Qld 4072, Australia.

B School of Mechanical and Mining Engineering, University of Queensland, Qld 4072, Australia.

C Corresponding author. Email: h.aghighi@uq.edu.au

The APPEA Journal 59(1) 166-178 https://doi.org/10.1071/AJ18140
Submitted: 7 December 2018  Accepted: 22 February 2019   Published: 17 June 2019

Abstract

Improved hydraulic fracturing models can better inform operational decisions regarding production from low-permeability coals and ultimately convert currently classified contingent resources to reserves. Improving current modelling approaches requires identification and investigation of the challenges involved in modelling hydraulic fracture stimulation in complex eastern Australian cases where permeability systems and stress regimes can vary significantly. This study investigated differences among existing and emerging advanced hydraulic fracture models and codes including numerical methods used to model fluid and rock behaviours during treatments; the ability to contextualise structure, behaviour and interaction of natural fractures with the propagating hydraulic fracture (e.g. cleat or natural fracture fabric, discrete fracture networks and pressure-dependent leak-off); and their capabilities in handling simultaneously growing or complex fracture development. One finding is that the new generation of models or codes that fully or partially use particle-based numerical methods are more capable in handling complexities associated with hydraulic stimulation of naturally fractured reservoirs. However, the computational cost and time for these models may cause concerns, particularly when modelling large reservoirs and treatments. Based on these limitations, many of the advanced, industry preferred, commercial hydraulic fracture simulators still choose to incorporate limited complexities with regard to natural fractures or represent them mathematically or implicitly. This investigation also indicates that most emerging models provide better representation of natural fractures, visualisation and integration into workflows for completion or stimulation design.

Keywords: cleats, coal seam gas, eastern Australia basins, hydraulic fracture modelling, hydraulic fracturing, low-permeability coals, natural fractures, stimulation.

Dr Mohammad Ali (Hamid) Aghighi is currently a research fellow at the University of Queensland, School of Chemical Engineering. He holds a PhD in Petroleum Engineering from the University of New South Wales and an MSc and a BSc in Mining Engineering from the University of Tehran. Hamid has over 20 years of experience in both academia and industry. Hamid has published 40+ papers in journals and proceedings in the areas of petroleum geomechanics, hydraulic fracturing, wellbore stability and numerical modelling of rock and fluid behaviour in porous media. He is a member of the SPE.

Raymond (Ray) L. Johnson, Jr. is presently Professor of Well Engineering and Production Technology at the University of Queensland, School of Chemical Engineering, and serves as Adjunct Associate Professor at the University of Adelaide. He has a PhD in Mining Engineering, an MSc in Petroleum Engineering, a Graduate Diploma in Information Technology and a BA in Chemistry. Ray has been active in SPE, past chair of the SPE Queensland Section, 2013 and 2015 co-Chair of the SPE Unconventional Reservoir Conference and Exhibition Asia Pacific, and Technical Award Recipient of SPE Regional Awards in 2011 and 2017. He has been actively involved as an author and researcher in the areas of reservoir geomechanics, hydraulic fracture design execution and evaluation, and unconventional resource development.

Dr Christopher Leonardi is a faculty member in the School of Mechanical and Mining Engineering at the University of Queensland. He holds a B.E. in Mechanical Engineering with Class I Honours from James Cook University, a PhD in Civil and Computational Engineering from Swansea University (UK), and a Research Affiliate appointment in the Department of Civil and Environmental Engineering at the Massachusetts Institute of Technology (USA). Dr Leonardi’s research is currently targeted at the development of large-scale numerical models, which can be used to provide insight into the complex characteristics of fluid–solid interaction in oil and gas reservoirs. Much of this work is undertaken in close collaboration with industry via the University of Queensland Centre for Coal Seam Gas. In addition to his academic pursuits, Christopher has over five years of consulting experience, applying both computational and analytical techniques to solve problems in the mining and mechanical engineering disciplines


References

AECOM Australia Pty Ltd (2017). ‘APLNG Project Hydraulic Fracturing Risk Assessment. Number 60507973’. (Origin Energy Resources Limited: Brisbane, Australia.)

Aghighi, M. A., and Rahman, S. S. (2010). Initiation of a secondary hydraulic fracture and its interaction with the primary fracture. International Journal of Rock Mechanics and Mining Sciences 47, 714–722.
Initiation of a secondary hydraulic fracture and its interaction with the primary fracture.Crossref | GoogleScholarGoogle Scholar |

Aghighi, M. A., Chen, Z., and Rahman, S. S. (2008). A holistic approach to the design and evaluation of hydraulic fracture treatments in tight gas reservoirs. SPE Production & Operations 23, 362–372.
A holistic approach to the design and evaluation of hydraulic fracture treatments in tight gas reservoirs.Crossref | GoogleScholarGoogle Scholar |

Barree, R. D. (2015). Stress Shadowing and Fracture Interference in GOHFER. (Barree & Associates.)

Barree, R. D., and Mukherjee, H. (1996). Determination of Pressure Dependent Leakoff and Its Effect on Fracture Geometry. In ‘SPE Annual Technical Conference and Exhibition, Denver, CO.’ (Society of Petroleum Engineers) https://doi.org/10.2118/36424-MS

Biot, M. A. (1941). General theory of three-dimensional consolidation. Journal of Applied Physics 12, 155–164.
General theory of three-dimensional consolidation.Crossref | GoogleScholarGoogle Scholar |

Boro, H., Rosero, E., and Bertotti, G. (2014). Fracture-network analysis of the Latemar Platform (Northern Italy): integrating outcrop studies to constrain the hydraulic properties of fractures in reservoir models. Petroleum Geoscience 20, 79–92.
Fracture-network analysis of the Latemar Platform (Northern Italy): integrating outcrop studies to constrain the hydraulic properties of fractures in reservoir models.Crossref | GoogleScholarGoogle Scholar |

Bourbiaux, B. (2010). Fractured reservoir simulation: a challenging and rewarding issue. Oil & Gas Science and Technology–Revue de l’Institut Français du Pétrole 65, 227–238.
Fractured reservoir simulation: a challenging and rewarding issue.Crossref | GoogleScholarGoogle Scholar |

Bruno, M., and Nakagawa, F. (1991). Pore pressure influence on tensile propagation in sedimentary rock. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts 28, 261–273.
Pore pressure influence on tensile propagation in sedimentary rock.Crossref | GoogleScholarGoogle Scholar |

Bunger, A., Jeffrey, R., Kear, J., Zhang, X., and Morgan, M. (2011) Experimental investigation of the interaction among closely spaced hydraulic fractures. In ‘45th US Rock Mechanics/Geomechanics Symposium, 26–29 June, San Francisco, CA.’ (American Rock Mechanics Association)

Bunger, A. P., Zhang, X., and Jeffrey, R. G. (2012). Parameters affecting the interaction among closely spaced hydraulic fractures. SPE Journal 17, 292–306.
Parameters affecting the interaction among closely spaced hydraulic fractures.Crossref | GoogleScholarGoogle Scholar |

Busseti, S., and Flottmann, T. (2018). Geomechanical and discrete fracture network modeling of coals in the Surat Basin, Australia. In ‘2nd International Discrete Fracture Network Engineering Conference.’ (American Rock Mechanics Association: Seattle, WA, USA.)

Chau, V. T., Bažant, Z. P., and Su, Y. (2016). Growth model for large branched three-dimensional hydraulic crack system in gas or oil shale. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 374, 20150418.
Growth model for large branched three-dimensional hydraulic crack system in gas or oil shale.Crossref | GoogleScholarGoogle Scholar |

Chen, Z., Bunger, A., Zhang, X., and Jeffrey, R. G. (2009). Cohesive zone finite element-based modeling of hydraulic fractures. Guti Lixue Xuebao 22, 443–452.

Clarkson, C. R., Pan, Z., Palmer, I. D., and Harpalani, S. (2010). Predicting sorption-induced strain and permeability increase with depletion for coalbed-methane reservoirs. SPE Journal 15, 152–159.
Predicting sorption-induced strain and permeability increase with depletion for coalbed-methane reservoirs.Crossref | GoogleScholarGoogle Scholar |

Condon, H. (2018). ‘Simulating Hydraulic Fracturing in Coals Via Advanced Computational Models.’ (University of Queensland.)

Crouch, S. L. (1976). Solution of plane elasticity problems by the displacement discontinuity method. I. Infinite body solution. International Journal for Numerical Methods in Engineering 10, 301–343.
Solution of plane elasticity problems by the displacement discontinuity method. I. Infinite body solution.Crossref | GoogleScholarGoogle Scholar |

Cundall, P. A., and Strack, O. D. L. (1979). A discrete numerical model for granular assemblies. Geotechnique 29, 47–65.
A discrete numerical model for granular assemblies.Crossref | GoogleScholarGoogle Scholar |

Damjanac, B., Detournay, C., and Cundall, P. A. (2016). Application of particle and lattice codes to simulation of hydraulic fracturing. Computational Particle Mechanics 3, 249–261.
Application of particle and lattice codes to simulation of hydraulic fracturing.Crossref | GoogleScholarGoogle Scholar |

de Pater, C. J., Weijers, L., Savic, M., Wolf, K. H. A. A., Van Den Hoek, P. J., and Barr, D. T. (1994). Experimental study of nonlinear effects on hydraulic fracture propagation. SPE Production & Facilities 9, 239–246.
Experimental study of nonlinear effects on hydraulic fracture propagation.Crossref | GoogleScholarGoogle Scholar |

Detournay, E., and Cheng, A. H. D. (1991). Plane strain analysis of a stationary hydraulic fracture in a poroelastic medium. International Journal of Solids and Structures 27, 1645–1662.
Plane strain analysis of a stationary hydraulic fracture in a poroelastic medium.Crossref | GoogleScholarGoogle Scholar |

Diamond, W. P. (1987). Underground observations of mined-through stimulation treatments of coalbeds. Quarterly Review of Methane from Coal Seams Technology 7, 19–29.

Diamond, W. P., and Oyler, D. C. (1987). Effects of Stimulation Treatments on Coalbeds and Surrounding Strata: Evidence from Underground Observations. Bureau of Mines, Report of investigation 9083. US Department of the Interior. Available at: https://www.cdc.gov/niosh/mining/works/coversheet267.html [verified 12 March 2019].

Doe, T. W., and Boyce, G. (1989). Orientation of hydraulic fractures in salt under hydrostatic and non-hydrostatic stresses. International Journal of Rock Mechanics and Mining Sciences 26, 605–611.
Orientation of hydraulic fractures in salt under hydrostatic and non-hydrostatic stresses.Crossref | GoogleScholarGoogle Scholar |

Espinoza, D., Pereira, J.-M., Vandamme, M., Dangla, P., and Vidal-Gilbert, S. (2015). Desorption-induced shear failure of coal bed seams during gas depletion. International Journal of Coal Geology 137, 142–151.
Desorption-induced shear failure of coal bed seams during gas depletion.Crossref | GoogleScholarGoogle Scholar |

Fan, T., Zhang, G., and Cui, J. (2014). The impact of cleats on hydraulic fracture initiation and propagation in coal seams. Petroleum Science 11, 532–539.
The impact of cleats on hydraulic fracture initiation and propagation in coal seams.Crossref | GoogleScholarGoogle Scholar |

Ferguson, W., Richards, G., Bere, A., Mutlu, U., and Paw, F. (2018). Modelling near-wellbore hydraulic fracture branching, complexity and tortuosity: a case study based on a fully coupled geomechanical modelling approach. In ‘SPE Hydraulic Fracturing Technology Conference and Exhibition, The Woodlands, Texas, USA.’ pp. 12. (Society of Petroleum Engineers) 10.2118/189890-MS

Flottman, T., Brooke-Barnett, S., Trubshaw, R., Naidu, S., Kirk-Burnnand, E., Paul, P., Busetti, S., and Hennings, P. (2013). Influence of in-situ stresses on fracture stimulations in the Surat Basin, Southeast Queensland, Paper SPE-167064-MS. In ‘SPE Unconventional Resources Conference and Exhibition-Asia Pacific, 11–13 November, Brisbane, Australia.’ p. 14. (Society of Petroleum Engineers). 10.2118/167064-MS

Fu, P., Johnson, S. M., and Carrigan, C. R. (2013). An explicitly coupled hydro‐geomechanical model for simulating hydraulic fracturing in arbitrary discrete fracture networks. International Journal for Numerical and Analytical Methods in Geomechanics 37, 2278–2300.
An explicitly coupled hydro‐geomechanical model for simulating hydraulic fracturing in arbitrary discrete fracture networks.Crossref | GoogleScholarGoogle Scholar |

Gale, J. F., Reed, R. M., and Holder, J. (2007). Natural fractures in the Barnett shale and their importance for hydraulic fracture treatments. AAPG Bulletin 91, 603–622.
Natural fractures in the Barnett shale and their importance for hydraulic fracture treatments.Crossref | GoogleScholarGoogle Scholar |

Gholami, A., Aghighi, M. A., and Rahman, S. S. (2017). Effect of non-uniform pore pressure fields on hydraulic fracture propagation. Journal of Petroleum Science Engineering 159, 889–902.
Effect of non-uniform pore pressure fields on hydraulic fracture propagation.Crossref | GoogleScholarGoogle Scholar |

Gordeliy, E., and Peirce, A. (2013). Coupling schemes for modeling hydraulic fracture propagation using the Xfem. Computer Methods in Applied Mechanics and Engineering 253, 305–322.
Coupling schemes for modeling hydraulic fracture propagation using the Xfem.Crossref | GoogleScholarGoogle Scholar |

Gupta, P., and Duarte, C. (2014). Simulation of non‐planar three‐dimensional hydraulic fracture propagation. International Journal for Numerical and Analytical Methods in Geomechanics 38, 1397–1430.
Simulation of non‐planar three‐dimensional hydraulic fracture propagation.Crossref | GoogleScholarGoogle Scholar |

Hou, B., Chen, M., Wang, Z., Yuan, J., and Liu, M. (2013). Hydraulic fracture initiation theory for a horizontal well in a coal seam. Petroleum Science 10, 219–225.
Hydraulic fracture initiation theory for a horizontal well in a coal seam.Crossref | GoogleScholarGoogle Scholar |

Huang, H., and Mattson, E. (2014). Physics-based modeling of hydraulic fracture propagation and permeability evolution of fracture network in shale gas formation. In ‘48th U.S. Rock Mechanics/Geomechanics Symposium, Minneapolis, Minnesota.’ p. 9. (American Rock Mechanics Association)

Jeffrey, R. G. (1996). Asymmetrically propped hydraulic fractures. SPE Production & Facilities 11, 244–249.
Asymmetrically propped hydraulic fractures.Crossref | GoogleScholarGoogle Scholar |

Jeffrey, R. (2012). ‘Hydraulic Fracturing for Coal Seam Gas (CSG) Stimulation in NSW.’ Report EP122949. (CSIRO Earth Science and Resource Engineering: Australia)

Jeffrey, R. G., and Settari, A. (1998) An instrumented hydraulic fracture experiment in coal. In ‘SPE Rocky Mountain Regional/Low-Permeability Reservoirs Symposium, 5–8 April 1998, Denver, Colorado.’ pp. 43–50. (Society of Petroleum Engineers) 10.2118/39908-MS

Jeffrey, R. G., Vandamme, L., Hinkel, J., and Homer, D. M. (1987) Propagation of fractures in coal: equivalent modulus and parallel fracture effects. Paper No. 8725. In ‘1987 Coalbed Methane Symposium, November 16–19 1987, Tuscaloosa, Alabama.’ pp. 113–118. (Easter Region Coalbed Methane Resource Centre, University of Alabama: Tuscaloosa, AL.)

Jeffrey, R. G. Jr, Brynes, R. P., Lynch, P. J., and Ling, D. J. (1992). An analysis of hydraulic fracture and mineback data for a treatment in the German Creek Coal Seam. In ‘SPE Rocky Mountain Regional Meeting, Casper, WY, USA.’ p. 13. (Society of Petroleum Engineers) 10.2118/24362-MS

Jeffrey, R. G., Settari, A., and Smith, N. P. (1995) Comparison of hydraulic fracture field experiments, including mineback geometry data, with numerical fracture model simulations. In ‘Proceedings - SPE Annual Technical Conference and Exhibition.’ pp. 591–606. (Society of Petroleum Engineers) 10.2118/30508-MS

Jeffrey, R. G., Vlahovic, W., Doyle, R. P., and Wood, J. H. (1998). Propped fracture geometry of three hydraulic fractures in Sydney Basin Coal Seams. In ‘SPE Asia Pacific Oil and Gas Conference and Exhibition, Perth, Australia.’ (Society of Petroleum Engineers) 10.2118/50061-MS

Jeffrey, R., Zhang, X., Chen, Z., Wu, B., Kear, J., and Kasperczyk, D. (2016). Developing models to better predict hydraulic fracture growth in Australian coal seams. Number EP178530. (CSIRO: Canberra, Australia.)

Johnson, R. L., Jr, and Greenstreet, C. W. (2003). Managing uncertainty related to hydraulic fracturing modeling in complex stress environments with pressure-dependent leakoff. In ‘SPE Annual Technical Conference and Exhibition, Denver, CO, USA.’ pp. 15. (Society of Petroleum Engineers) 10.2118/84492-MS

Johnson, R. L., Jr, Dunn, K. P., Bastian, P. A., Hopkins, C. W., and Conway, M. W. (1998). Qualifying hydraulic fracturing effectiveness in tight, naturally fractured reservoirs by combining three-dimensional fracturing and reservoir simulators. In ‘SPE Annual Technical Conference and Exhibition, New Orleans, LA, USA.’ (Society of Petroleum Engineers) 10.2118/49048-MS

Johnson, R. L., Jr, Dunn, K. P., Hopkins, C. W., and Conway, M. W. (2003). The pressure-dependence ratio: a bottomhole treating pressure diagnostic tool for hydraulic fracturing treatments in tight, naturally fractured reservoirs. In ‘SPE Production Operations Symposium, Oklahoma City, OK, USA.’ (Society of Petroleum Engineers) 10.2118/77916-MS

Johnson, R. L., Jr, Glassborow, B., Scott, M. P., Pallikathekathil, Z. J., Datey, A., and Meyer, J. (2010a). Utilizing current technologies to understand permeability, stress azimuths and magnitudes and their impact on hydraulic fracturing success in a coal seam gas reservoir. In ‘SPE Asia Pacific Oil and Gas Conference and Exhibition, Brisbane, Australia’. p. 28. (Society of Petroleum Engineers) 10.2118/133066-MS

Johnson, R. L., Scott, M. P., Jeffrey, R. G., Chen, Z., Bennett, L., Vandenborn, C. B., and Tcherkashnev, S. (2010b). Evaluating hydraulic fracture effectiveness in a coal seam gas reservoir from surface tiltmeter and microseismic monitoring. In ‘SPE Annual Technical Conference and Exhibition, Florence, Italy.’ p. 28. (Society of Petroleum Engineers) 10.2118/133063-MS

Johnson, R., Khair, H. A., Jeffrey, R., Meyer, J., Stark, C., and Tauchnitz, J. (2015). Improving fracture initiation and potential impact on fracture coverage by implementing optimal well-planning and drilling methods for typical stress conditions in the Cooper Basin, Central Australia. The APPEA Journal 55, 403.
Improving fracture initiation and potential impact on fracture coverage by implementing optimal well-planning and drilling methods for typical stress conditions in the Cooper Basin, Central Australia.Crossref | GoogleScholarGoogle Scholar |

Keshavarz, A., Badalyan, A., Carageorgos, T., Bedrikovetsky, P., and Johnson, R. (2014a). Enhancement of CBM well fracturing through stimulation of cleat permeability by ultra-fine particle injection. The APPEA Journal 54, 155–166.
Enhancement of CBM well fracturing through stimulation of cleat permeability by ultra-fine particle injection.Crossref | GoogleScholarGoogle Scholar |

Keshavarz, A., Badalyan, A., Carageorgos, T., Johnson, R., and Bedrikovetsky, P. (2014b). Stimulation of Unconventional Naturally Fractured Reservoirs by Graded Proppant Injection: Experimental Study and Mathematical Model. In ‘SPE/EAGE European Unconventional Resources Conference and Exhibition, Vienna, Austria.’ (Society of Petroleum Engineers) 10.2118/167757-MS

Keshavarz, A., Badalyan, A., Carageorgos, T., Bedrikovetsky, P., and Johnson, R. (2015a). Graded proppant injection into coal seam gas and shale gas reservoirs for well stimulation. In ‘SPE European Formation Damage Conference and Exhibition, Budapest, Hungary.’ p. 15. (Society of Petroleum Engineers) 10.2118/174200-MS

Keshavarz, A., Badalyan, A., Carageorgos, T., Bedrikovetsky, P., and Johnson, R. L. (2015b). Stimulation of coal seam permeability by micro-sized graded proppant placement using selective fluid properties. Fuel 144, 228–236.
Stimulation of coal seam permeability by micro-sized graded proppant placement using selective fluid properties.Crossref | GoogleScholarGoogle Scholar |

Lei, Q., Latham, J.-P., and Tsang, C.-F. (2017). The use of discrete fracture networks for modelling coupled geomechanical and hydrological behaviour of fractured rocks. Computers and Geotechnics 85, 151–176.
The use of discrete fracture networks for modelling coupled geomechanical and hydrological behaviour of fractured rocks.Crossref | GoogleScholarGoogle Scholar |

Li, L. C., Tang, C. A., Li, G., Wang, S. Y., Liang, Z. Z., and Zhang, Y. B. (2012). Numerical simulation of 3d hydraulic fracturing based on an improved flow-stress-damage model and a parallel FEM technique. Rock Mechanics and Rock Engineering 45, 801–818.

Liu, P., Liu, F., She, C., Zhao, L., Luo, Z., Guan, W., and Li, N. (2016). Multi-phase fracturing fluid leakoff model for fractured reservoir using extended finite element method. Journal of Natural Gas Science and Engineering 28, 548–557.
Multi-phase fracturing fluid leakoff model for fractured reservoir using extended finite element method.Crossref | GoogleScholarGoogle Scholar |

Liu, Q., Sun, L., Liu, P., and Chen, L. (2018). Modeling simultaneous multiple fracturing using the combined finite-discrete element method. Geofluids 2018, 4252904. .
Modeling simultaneous multiple fracturing using the combined finite-discrete element method.Crossref | GoogleScholarGoogle Scholar |

Mack, M. G., and Elbel, J. L. (1994). ‘Hydraulic Fracture Orientation and Pressure Response During Fracturing of Producing Well.’ (Balkema: Rotterdam, Netherlands.)

Mahrer, K. D. (1999). A review and perspective on far-field hydraulic fracture geometry studies. Journal of Petroleum Science Engineering 24, 13–28.
A review and perspective on far-field hydraulic fracture geometry studies.Crossref | GoogleScholarGoogle Scholar |

McClure, M. W., and Horne, R. N. (2013). ‘Discrete Fracture Network Modeling of Hydraulic Stimulation: Coupling Flow and Geomechanics.’ (Springer International Publishing.)

Meyer, B. R., and Bazan, L. W. (2011) A discrete fracture network model for hydraulically induced fractures-theory, parametric and case studies. In ‘SPE Hydraulic Fracturing Technology Conference, The Woodlands, TX, USA.’ (Society of Petroleum Engineers) 10.2118/140514-MS

Mukhopadhyay, N., Maiti, S., and Kakodkar, A. (2000). A review of SIF evaluation and modelling of singularities in BEM. Computational Mechanics 25, 358–375.
A review of SIF evaluation and modelling of singularities in BEM.Crossref | GoogleScholarGoogle Scholar |

Munjiza, A. A. (2004). ‘The Combined Finite-Discrete Element Method.’ (Wiley: Hoboken, NJ)

Olson, J. E. (1995). Fracturing from highly deviated and horizontal wells: numerical analysis of non-planar fracture propagation. In ‘Low Permeability Reservoirs Symposium, Denver, CO, USA.’ p. 13. (Society of Petroleum Engineers) 10.2118/29573-MS

Olson, J. (2008) Multi-fracture propagation modeling: applications to hydraulic fracturing in shales and tight gas sands. In ‘The 42nd US Rock Mechanics Symposium (USRMS), San Francisco, CA, USA.’ (American Rock Mechanics Association)

Olson, J. E., and Taleghani, A. D. (2013). Modeling simultaneous growth of multiple hydraulic fractures and their interaction with natural fractures. In ‘SPE Hydraulic Fracturing Technology Conference, The Woodlands, TX, USA.’ (Society of Petroleum Engineers) 10.2118/119739-MS

Oñate, E., and Owen, R. (2011). ‘Particle-Based Methods: Fundamentals and Applications.’ (Springer: Netherlands.)

Palmer, I. D., King, N. S., and Sparks, D. P. (1993). The character of coal fracture treatments in Oak Grove Field, Black Warrior Basin. In Situ 17, 273–309.

Paluszny, A., Tang, X., Nejati, M., and Zimmerman, R. W. (2016). A direct fragmentation method with Weibull function distribution of sizes based on finite-and discrete element simulations. International Journal of Solids and Structures 80, 38–51.
A direct fragmentation method with Weibull function distribution of sizes based on finite-and discrete element simulations.Crossref | GoogleScholarGoogle Scholar |

Paluszny, A., Salimzadeh, S., and Zimmerman, R. W. (2018). Chapter 1 - Finite-element modeling of the growth and interaction of hydraulic fractures in poroelastic rock formations. In ‘Hydraulic Fracture Modeling.’ (Ed. Y.-S. Wu.) pp. 1–19. (Gulf Professional Publishing)

Peirce, A., and Bunger, A. (2015). Interference fracturing: nonuniform distributions of perforation clusters that promote simultaneous growth of multiple hydraulic fractures. SPE Journal 20, 384–395.
Interference fracturing: nonuniform distributions of perforation clusters that promote simultaneous growth of multiple hydraulic fractures.Crossref | GoogleScholarGoogle Scholar |

Penny, G. S., and Conway, M. W. (1994). Coordinated studies in support of hydraulic fracturing of coalbed methane, Gri-94/0398. Gas Research Institute, Chicago, Illinois.

Potyondy, D. O., and Cundall, P. A. (2004). A bonded-particle model for rock. International Journal of Rock Mechanics and Mining Sciences 41, 1329–1364.
A bonded-particle model for rock.Crossref | GoogleScholarGoogle Scholar |

Profit, M., Dutko, M., Yu, J., Cole, S., Angus, D., and Baird, A. (2016). Complementary hydro-mechanical coupled finite/discrete element and microseismic modelling to predict hydraulic fracture propagation in tight shale reservoirs. Computational Particle Mechanics 3, 229–248.
Complementary hydro-mechanical coupled finite/discrete element and microseismic modelling to predict hydraulic fracture propagation in tight shale reservoirs.Crossref | GoogleScholarGoogle Scholar |

Rahman, M., Hossain, M., and Rahman, S. (2002). A shear‐dilation‐based model for evaluation of hydraulically stimulated naturally fractured reservoirs. International Journal for Numerical and Analytical Methods in Geomechanics 26, 469–497.
A shear‐dilation‐based model for evaluation of hydraulically stimulated naturally fractured reservoirs.Crossref | GoogleScholarGoogle Scholar |

Rahman, M. M., Aghighi, M. A., Rahman, S. S., and Ravoof, S. A. (2009). Interaction between induced hydraulic fracture and pre-existing natural fracture in a poro-elastic environment: effect of pore pressure change and the orientation of natural fractures. In ‘Asia Pacific Oil and Gas Conference & Exhibition, Jakarta, Indonesia.’ p. 8. (Society of Petroleum Engineers) 10.2118/122574-MS

Ramurthy, M., and Hendrickson, R. B. (2007). Effects of high pressure dependent leakoff and high process zone stress in coal stimulation treatments. In ‘Rocky Mountain Oil & Gas Technology Symposium, Denver, CO, USA.’ p. 8. (Society of Petroleum Engineers) 10.2118/107971-MS

Reynolds, M., and Shaw, J. (2005) Optimizing hydraulic fracturing treatments for CBM production using data from post-frac analysis. In ‘Canadian International Petroleum Conference, 7–9 June 2005, Calgary, Alberta.’ p. 16. (Petroleum Society of Canada) 10.2118/2005-213

Rodvelt, G. (2014). Chapter 6 - Vertical well construction and hydraulic fracturing for CBM completions. In ‘Coal Bed Methane.’ (Eds P. Thakur, S. Schatzel and K. Aminian.) pp. 101–135. (Elsevier: Oxford, UK.)

Rutqvist, J. (2011). Status of the TOUGH-FLAC simulator and recent applications related to coupled fluid flow and crustal deformations. Computers & Geosciences 37, 739–750.
Status of the TOUGH-FLAC simulator and recent applications related to coupled fluid flow and crustal deformations.Crossref | GoogleScholarGoogle Scholar |

Sato, K., Itaoka, M., and Hashida, T. (2013) FEM simulation of mixed mode crack propagation induced by hydraulic fracturing. In ‘ICF10, Honolulu (USA) 2001.’

Scott, M., Johnson, R. L., Jr, Datey, A., Vandenborn, C., and Woodroof, R. (2010) Evaluating hydraulic fracture geometry from sonic anisotropy and radioactive tracer logs. In ‘SPE Asia Pacific Oil and Gas Conference and Exhibition, Brisbane, Australia, 18–20 October 2010.’ (Society of Petroleum Engineers) 10.2118/133059-MS

Shabro, V., Torres-Verdín, C., Javadpour, F., and Sepehrnoori, K. (2012). Finite-difference approximation for fluid-flow simulation and calculation of permeability in porous media. Transport in Porous Media 94, 775–793.
Finite-difference approximation for fluid-flow simulation and calculation of permeability in porous media.Crossref | GoogleScholarGoogle Scholar |

Sih, G. C. (1974). Strain-energy-density factor applied to mixed mode crack problems. International Journal of Fracture 10, 305–321.
Strain-energy-density factor applied to mixed mode crack problems.Crossref | GoogleScholarGoogle Scholar |

Sinha, B., Datey, A., and Glassborow, B. (2011). Hydraulic fracture characterization using cased-hole sonic data. SPWLA 2011/J. In ‘SPWLA 52nd Annual Symposium, Colorado Springs, CO, USA.’ (Society of Petrophysicists and Well-Log Analysts)

Sneddon, I. N. (1946). The distribution of stress in the neighbourhood of a crack in an elastic solid. Proceedings of the Royal Society of London A. Mathematical and Physical Sciences 187, 229–260.
The distribution of stress in the neighbourhood of a crack in an elastic solid.Crossref | GoogleScholarGoogle Scholar |

Su, K., Zhou, X., Tang, X., Xu, X., and Liu, Q. (2017). Mechanism of cracking in dams using a hybrid FE-meshfree method. International Journal of Geomechanics 17, 04017071.
Mechanism of cracking in dams using a hybrid FE-meshfree method.Crossref | GoogleScholarGoogle Scholar |

Tang, H., Winterfeld, P. H., Wu, Y.-S., Huang, Z.-q., Di, Y., Pan, Z., and Zhang, J. (2016). Integrated simulation of multi-stage hydraulic fracturing in unconventional reservoirs. Journal of Natural Gas Science and Engineering 36, 875–892.
Integrated simulation of multi-stage hydraulic fracturing in unconventional reservoirs.Crossref | GoogleScholarGoogle Scholar |

Van Den Hoek, P. J., Van Den Berg, J. T. M., and Shlyapobersky, J. (1993). Theoretical and experimental investigation of rock dilatancy near the tip of a propagating hydraulic fracture. International Journal of Rock Mechanics and Mining Sciences 30, 1261–1264.
Theoretical and experimental investigation of rock dilatancy near the tip of a propagating hydraulic fracture.Crossref | GoogleScholarGoogle Scholar |

Wang, H. (2016). Numerical investigation of fracture spacing and sequencing effects on multiple hydraulic fracture interference and coalescence in brittle and ductile reservoir rocks. Engineering Fracture Mechanics 157, 107–124.
Numerical investigation of fracture spacing and sequencing effects on multiple hydraulic fracture interference and coalescence in brittle and ductile reservoir rocks.Crossref | GoogleScholarGoogle Scholar |

Wangen, M. (2013). Finite element modeling of hydraulic fracturing in 3D. Computational Geosciences 17, 647–659.
Finite element modeling of hydraulic fracturing in 3D.Crossref | GoogleScholarGoogle Scholar |

Warpinski, N. R. (1988). Dual Leakoff Behavior in Hydraulic Fracturing of Tight, Lenticular Gas Sands. SPE Production Engineering 5, 243–252.
Dual Leakoff Behavior in Hydraulic Fracturing of Tight, Lenticular Gas Sands.Crossref | GoogleScholarGoogle Scholar |

Warpinski, N. R., and Branagan, P. (1989). Altered-stress fracturing. Journal of Petroleum Technology 41, 990–997.
Altered-stress fracturing.Crossref | GoogleScholarGoogle Scholar |

Warpinski, N. R., Uhl, J. E., Engler, B. P., and Keefe, R. G. (1998). Development of stimulation diagnostic technology, Gri-98/0089. Gas Research Institute, Chicago, IL, USA.

Warpinski, N. R., Mayerhofer, M. J., Vincent, M. C., Cipolla, C. L., and Lolon, E. P. (2009). Stimulating unconventional reservoirs: maximizing network growth while optimizing fracture conductivity. Journal of Canadian Petroleum Technology 48, 39–51.
Stimulating unconventional reservoirs: maximizing network growth while optimizing fracture conductivity.Crossref | GoogleScholarGoogle Scholar |

Weijers, L., Wright, C., Sugiyama, H., Sato, K., and Zhigang, L. (2000) Simultaneous propagation of multiple hydraulic fractures-evidence, impact and modeling implications. In ‘International Oil and Gas Conference and Exhibition in China, Bejing, China.’ (Society of Petroleum Engineers) 10.2118/64772-MS

Weng, X., Kresse, O., Cohen, C. E., Wu, R., and Gu, H. (2011). Modeling of hydraulic fracture network propagation in a naturally fractured formation. SPE Production & Operations 26, 368–380.
Modeling of hydraulic fracture network propagation in a naturally fractured formation.Crossref | GoogleScholarGoogle Scholar |

Wennberg, O. P., Casini, G., Jonoud, S., and Peacock, D. C. P. (2016). The characteristics of open fractures in carbonate reservoirs and their impact on fluid flow: a discussion. Petroleum Geoscience 22, 91–104.
The characteristics of open fractures in carbonate reservoirs and their impact on fluid flow: a discussion.Crossref | GoogleScholarGoogle Scholar |

Wright, C. A., and Conant, R. A. (1995) Hydraulic fracture reorientation in primary and secondary recovery from low-permeability reservoirs. SPE 30484. In ‘SPE Annual Technical Conference and Exhibition, October 22–25, Dallas, TX, USA.’ (Society of Petroleum Engineers) 10.2118/30484-MS

Wu, R., Kresse, O., Weng, X., Cohen, C.-E., and Gu, H. (2012). Modeling of interaction of hydraulic fractures in complex fracture networks. In ‘SPE Hydraulic Fracturing Technology Conference, The Woodlands, TX, USA.’ p. 14. (Society of Petroleum Engineers) 10.2118/152052-MS

Xie, J., Huang, H., Ma, H., Zeng, B., Tang, J., Yu, W., and Wu, K. (2018). Numerical investigation of effect of natural fractures on hydraulic-fracture propagation in unconventional reservoirs. Journal of Natural Gas Science and Engineering 54, 143–153.
Numerical investigation of effect of natural fractures on hydraulic-fracture propagation in unconventional reservoirs.Crossref | GoogleScholarGoogle Scholar |

Zhigang, L., Shengli, F., and Xiaoming, W. (2000). Research on mechanical property test and mechanism of hydraulic fracture of gas well in coal beds. Petroleum Drilling Techniques 28, 10–12.

Zipf, R. K., and Bieniawski, Z. T. (1990). Mixed-mode fracture toughness testing of coal. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts 27, 479–493.
Mixed-mode fracture toughness testing of coal.Crossref | GoogleScholarGoogle Scholar |