Free Standard AU & NZ Shipping For All Book Orders Over $80!
Register      Login
The APPEA Journal The APPEA Journal Society
Journal of Australian Energy Producers
RESEARCH ARTICLE (Non peer reviewed)

A step change in safety performance through critical control management

Roberta Selleck
+ Author Affiliations
- Author Affiliations

Clough Limited, 34 Parliament Place, West Perth, 6005 WA, Australia. Email: aaron.ryder@clough.com.au

The APPEA Journal 57(2) 539-542 https://doi.org/10.1071/AJ16192
Accepted: 6 April 2017   Published: 29 May 2017

Abstract

The oil and gas construction industry experiences a high rate of unnecessary work-related fatalities. The International Association of Oil and Gas Producers (IOGP) reported 54 fatalities in 40 fatal incidents in 2015. When assessing this against the use of IOGP Life-Saving Rules (LSRs), which contractors are required to adopt, the IOGP found that of the 40 fatal incident descriptions in 2015, at least 73% related to the IOGP LSRs.

A program to apply a critical control management (CCM), or safety cased, approach to fatal hazards was trialled on construction sites in Australia and South Africa ranging from large power station constructions to offshore hook-up and commissioning to brownfields maintenance. The results demonstrated a step change in the safety performance occurred on projects where the CCM program was implemented. These projects have each demonstrated a significant improvement in recordable injuries, increases in hazard reporting and awareness, and almost complete elimination of high-potential incidents.

Further investigation of the reasons for these results is the subject of a PhD project and includes: (1) understanding how the CCM program improves hazard awareness and decision making of frontline supervisors; (2) determining the effects CCM has on the safety climate of the organisation as detailed focus is applied on the effectiveness of controls that drive leadership decisions; and (3) investigating how CCM improves leadership at all levels of the organisation due to better information that allows tangible action to be taken to improve control effectiveness.

This paper describes the progress of CCM program development, details present results and lessons learned, and provides a context for how CCM programs can be implemented in other organisations.

Keywords: awareness, change management, critical control management, hazard, prevention, risk, safety, safety case.

Roberta Selleck has a BSc and graduate diplomas in environmental impact assessment, education and occupational health and safety. Roberta is a Health, Safety, Security and Environment (HSSE) professional with over 20 years’ experience in senior HSSE manager roles across the resource sector, and has held site and corporate-based roles in the oil and gas and mining industries. Roberta joined Clough in August 2013 in her current role to support the design, development and implementation of Clough’s HSSE improvement strategy. Significantly, this has included developing the Clough Major Accident Prevention Program to address high-risk construction activities undertaken by Clough. Prior to joining Clough, Roberta was the HSE Manager for the FMG Solomon Operational Readiness team, which included the introduction of autonomous hauling strategy for mining at Solomon.


References

Brandsæter, A. (2002). Risk assessment in the offshore industry. Safety Science 40, 231–269.2.
Risk assessment in the offshore industry.Crossref | GoogleScholarGoogle Scholar |

Cox, S. J., and Cheyne, A. J. T. (2000). Assessing safety culture in offshore environments. Safety Science 34, 111–129.
Assessing safety culture in offshore environments.Crossref | GoogleScholarGoogle Scholar |

Cullen, W. C. (1990). ‘The Public Inquiry into the Piper Alpha Disaster.’ Vol. 2. (HMSO: London.)

Health Safety Executive (HSE) UK (2015). Statistics on fatal injuries in the workplace in Great Britain 2015. Full-year details and technical notes. Available at: http://www.hse.gov.uk/statistics/pdf/fatalinjuries.pdf [verified 28 April 2017].

International Association of Oil and Gas Producers (IOGP) (2016). Safety performance indicators – 2015 data. (IOGP: London.) Available at: http://www.iogp.org/pubs/2015s.pdf [verified 15 September 2016].

Khan, F. I., Sadiq, R., and Husain, T. (2002). Risk-based process safety assessment and control measures design for offshore process facilities. Journal of Hazardous Materials 94, 1–36.
Risk-based process safety assessment and control measures design for offshore process facilities.Crossref | GoogleScholarGoogle Scholar |

National Institute for Occupational Safety and Health (NIOS) 1993. Fatal injuries to workers in the United States, 1980–1989: a decade of surveillance. (US Department of Health and Human Services, Centers for Disease Control and Prevention: Atlanta, GA.) Available at: https://www.cdc.gov/niosh/docs/93-108/pdfs/93-108s.pdf [verified 28 April 2017].

National Offshore Petroleum Safety and Environmental Management Authority (NOPSEMA) (2013). The safety case in context: an overview of the safety case regime. (NOPSEMA: Melbourne.) Available at: https://www.nopsema.gov.au/assets/Guidance-notes/A86480.pdf [verified 28 April 2016].

National Offshore Petroleum Safety and Environmental Management Authority (NOPSEMA) (2016). Annual data tables – Q2-2016. (NOPSEMA: Melbourne.) Available at: https://www.nopsema.gov.au/assets/Data-and-statistics/A493074-Annual-Data-Tables-Q2-2016.pdf[verified 15 September 2016].

Pate-Cornell, E. (1993). Learning from the Piper Alpha accident: a postmortem analysis of technical and organizational factors. Risk Analysis 13, 215–232.
Learning from the Piper Alpha accident: a postmortem analysis of technical and organizational factors.Crossref | GoogleScholarGoogle Scholar |

SafeWork Australia (2012). How to manage work health and safety risks – code of practice. (SafeWork Australia: Canberra.)

SafeWork Australia (2015). Construction industry profile. Available at: http://www.safeworkaustralia.gov.au/sites/swa/about/publications/pages/construction-industry-profile [verified 5 September 2016].

SafeWork Australia (2016). Work-related fatalities. Available at: http://www.safeworkaustralia.gov.au/sites/swa/statistics/work-related-fatalities/pages/worker-fatalities [verified 15 September 2016].

US Department of Labor (2016). 2014 Census of fatal occupational injuries (revised data). Available at: https://www.bls.gov/news.release/archives/cfoi_09172015.pdf [verified 18 September 2016].

Vinnem, J. E. (2010). Risk indicators for major hazards on offshore installations. Safety Science 48, 770–787.
Risk indicators for major hazards on offshore installations.Crossref | GoogleScholarGoogle Scholar |