Free Standard AU & NZ Shipping For All Book Orders Over $80!
Register      Login
Australian Energy Producers Journal Australian Energy Producers Journal Society
Journal of Australian Energy Producers
RESEARCH ARTICLE (Non peer reviewed)

Ammonia – an assessment of potential environmental impacts including prevention and mitigation measures

Anam Saeed A * and Bethan Parnum A
+ Author Affiliations
- Author Affiliations

A Environmental Resources Management, Perth, WA, Australia.




Dr Anam Saeed is a Managing Consultant at ERM, based in Perth, Australia. She is experienced in process and environmental engineering, particularly in the areas of pollution control, disposal of waste materials, quantitative data analysis and evaluation to identify performance improvements, as well as environmental impact assessments, hazard identification and process safety.



Bethan Parnum is a Consulting Director and has over 15 years’ experience in environmental impact assessment in marine environments and regulatory approvals for offshore industries, including spill planning and management.

* Correspondence to: anam.saeed@erm.com

Australian Energy Producers Journal 64 S512-S515 https://doi.org/10.1071/EP23141
Accepted: 20 February 2024  Published: 16 May 2024

© 2024 The Author(s) (or their employer(s)). Published by CSIRO Publishing on behalf of Australian Energy Producers.

Abstract

Ammonia (chemical formula NH3) is one of the most widely produced chemicals for industrial and agricultural uses. Ammonia has gained attention as a potential hydrogen and energy carrier, and low carbon substitute fuel for rail and maritime transport. The potential of ammonia for new use cases may lead to an increased footprint of potential environmental impacts. The physical and chemical properties of ammonia offer significant benefits for transportation and storage, but challenges remain due to its highly toxic nature and uses outside of dedicated industrial precincts. Ammonia is typically liquefied to increase density for ready storage and transportation. Unplanned releases of liquid ammonia will result in immediate environmental impacts. Unplanned releases may adversely affect receptor species in aquatic and terrestrial environments, human health, as well as the reputation of the responsible organisation. Dispersion of ammonia into the environment depends on factors that include mixture density, temperature, humidity, wind and wave action, and release mode and direction. Understanding the fate of ammonia is fundamental to adoption of effective mitigation measures. Consequently, it is necessary to understand the behaviour of ammonia in the environment, how unplanned releases can be minimised, and how they can be combatted, in order to appraise its suitability as a low carbon liquid transport fuel. This paper assesses the risks posed by ammonia spills, its fate in aquatic environments, and the applicability of available spill models. It also addresses management measures for the prevention and mitigation of spills noting the highly soluble and toxic nature of the chemical.

Keywords: ammonia, ammonia spill, aquatic environment, environmental impacts, management, mitigation, prevention, toxicity.

Biographies

EP23141_B1.gif

Dr Anam Saeed is a Managing Consultant at ERM, based in Perth, Australia. She is experienced in process and environmental engineering, particularly in the areas of pollution control, disposal of waste materials, quantitative data analysis and evaluation to identify performance improvements, as well as environmental impact assessments, hazard identification and process safety.

EP23141_B2.gif

Bethan Parnum is a Consulting Director and has over 15 years’ experience in environmental impact assessment in marine environments and regulatory approvals for offshore industries, including spill planning and management.

References

Ammonfuel (2020) An Industrial View of Ammonia as a Marine Fuel. Alfa Laval, Hafnia, Haldor Topsoe, Vestas, Siemens Gamesa. Available at topsoe.com

Ansari AA, Singh GS, Lanza GR, Rast W (2010) ‘Eutrophication: causes, consequences, and control. Vol. 1.’ (Springer Science & Business Media)

Brenchley DL (1981) ‘Assessment of Research and Development of Ammonia Safety and Environmental Control.’ (Pacific Northwest Laboratory Operated for the U.S. Department of Energy by Battelle Memorial Institute)

Kass MD, Sluder CS, Kaul BC (2021) Spill behaviour, detection, and mitigation for non-traditional marine fuels. DE-AC05-00OR22725. Available at https://www.maritime.dot.gov/sites/marad.dot.gov/files/2021-05/ORNLAlt_Fuels_Spill_Study_Report_19Mar2021.pdf

Levit SM (2010) ‘A Literature Review of Effects of Ammonia on Fish. Vol. 12.’ (Center for Science in Public Participation)

Maxwell GR (2005) Uses of Ammonia. In ‘Synthetic Nitrogen Products’. (Springer: Boston, MA) 10.1007/0-306-48639-3_7

Mooney TJ, Pease CJ, Hogan AC (2018) Freshwater Chronic Ammonia Toxicity: A Tropical‐to‐temperate Comparison. Environmental Toxicology and Chemistry 13, 177-189.
| Crossref | Google Scholar |

Ojha M, Dhiman AK (2010) Problem, Failure and Safety Analysis of Ammonia Plant, a Review. International Review of Chemical Engineering 2(6), 631-646.
| Google Scholar |

Raj PK, Hagopian J, Kalelkar AS (1974) Prediction of Hazards of Spills of Anhydrous Ammonia on Water. Report no. CG-D-74-74. (United States Coast Guard: Cambridge, MA)

US EPA (2013) Aquatic Life Ambient Water Quality Criteria for Ammonia - Freshwater. Available at https://www.federalregister.gov/documents/2013/08/22/2013-20307/final-aquatic-life-ambient-water-quality-criteria-for-ammonia-freshwater-2013

US EPA (2023) Aquatic Life Criteria – Ammonia. Available at https://www.epa.gov/wqc/aquatic-life-criteria ammonia

Valera-Medina A, Ifan EL, Chong CT (2021) Chapter 11 – Regulatory Framework. In ‘Techno-Economic Challenges of Green Ammonia as an Energy Vector’. (Eds AV Medina, RB Alcantara) ISBN 9780128205600. pp. 259–276. (Academic Press) 10.1016/B978-0-12-820560-0.00011-4

van Rooij A (2005) Engineering Contractors in the Chemical Industry. The development of ammonia processes. The Development of Ammonia Processes, 1910–1940. History and Technology 21(4), 345-366.
| Crossref | Google Scholar |