Register      Login
Australian Energy Producers Journal Australian Energy Producers Journal Society
Journal of Australian Energy Producers
RESEARCH ARTICLE

LARGE-BORE GAS WELL DESIGN—APPLICATION TO OFFSHORE GAS FIELD DEVELOPMENT

F. Thompson, I. Terziev and I. Taggart

The APPEA Journal 46(1) 79 - 88
Published: 2006

Abstract

Offshore gas development projects including the North West Shelf of Australia continue to develop new technologies in order to reduce development costs. Given that the number of development wells directly relates to capital expenditure, past attempts have focussed on obtaining higher gas rates out of conventional well designs by carefully managing erosional limits, which, in turn, tend to restrict the use of higher offtake rates.

A strategy based on safely flowing gas wells at higher rates results in fewer wells and delays the phasing-in of additional wells, both of which result in economic enhancement. In recent times the industry has increasingly moved to large-bore gas well technology as a means of realising this strategy. Large-bore gas wells are defined as wells equipped with production tubing and flow control devices larger than 7” or 177 mm. Originally developed for land-based operations, this technology is increasingly moving offshore into totally subsea systems. One factor limiting the speed of adoption of this technology is the trade-off that exists between the increased offtake rates offered by large-bore systems and the risks posed by wear due to erosion in and around the wellhead area caused by any solids entrained in the gas stream.

The problem becomes more acute when different-sized well designs employ the same wellhead configurations, because the upper wellhead area is usually the critical and limiting wear component.

This paper summarises the recent developments in large-bore offshore applications and presents a consistent methodology showing how different gas well designs can be compared using hydraulic and erosional considerations. Additional trade-offs posed by reliable solids monitoring and the adoption of untested wellhead and intervention designs are discussed. In many cases, hybrid designs based on large diameter tubulars but with conventional wellheads may offer a useful balance between higher well rates and adoption of proven technology. The results shown here are directly applicable to alternative well designs presently under consideration for a number of offshore reservoir developments.

https://doi.org/10.1071/AJ05005

© CSIRO 2006

Committee on Publication Ethics


Export Citation