Processing technology changes in the Australian sheep meat industry: an overview
D. L. Hopkins
+ Author Affiliations
- Author Affiliations
Industry & Investment NSW (Primary Industries), Centre for Red Meat and Sheep Development, PO Box 129, Cowra, NSW 2794, Australia. Email: david.hopkins@industry.nsw.gov.au
Animal Production Science 51(5) 399-405 https://doi.org/10.1071/AN10258
Submitted: 25 November 2010 Accepted: 1 February 2011 Published: 5 May 2011
Abstract
Over the last 20 years the Australian sheep industry, particularly the lamb meat sector, has undergone a major change in focus such that consumer requirements are a paramount determinant for production and processing developments. As a result automatic accurate methods of measuring carcasses for traits like fatness and meat yield have been important to aid a reduction by industry in carcass fat levels in line with domestic and international consumer demand. This occurred while carcass weight increased due to a range of genetic and production factors implemented on-farm. Further to this in the last 5–7 years there has been a dramatic increase in the adoption of electrical technologies based on new methodologies with a shift in focus onto eating quality. Underlying this new approach was the electrical stimulation of individual carcasses on segmented electrodes in a dose-responsive way with electricity that has short pulse widths and low to medium voltages and is thus much safer than the original high voltage systems. This technology allowed stimulation units to be fitted into abattoirs where this was not previously possible and validation showed that the technology could reduce toughness in lamb destined for the domestic market and some export markets. More recent technology to stretch and shape cuts shows promise for improving both the quality and product range from sheep and lamb carcasses. The industry continues to focus on meat quality and has shown a significant increase in exports, while maintaining per-capita domestic consumption at record retail prices. This indicates an industry where research investment across the board has shown significant returns.
Additional keyword: lamb, carcass, quality.
References
Anonymous (2002) ‘Australian Standard AS/NZS 60479. Effects of current on human beings and livestock.’ (Standards Australia, Standards House: Sydney)Anonymous (2003) Evaluation & Future Direction of Innovative Red Meats, Food Service Providers, Report Project RMICMR.001, July 2003, Meat & Livestock Australia, Sydney.
Anonymous (2008) Flowline – big time value adding. Australian Meat News February, 34–35.
Ashton-Jones S (1986) Developing markets for the prime lamb industry. Proceedings of the Australian Society of Animal Production 16, 92–94.
Bennett JM (1997) Eating quality of lamb. Situation Paper, Meat Research Corporation, Sydney, Australia.
Bouton PE, Harris PV, Shorthose WR, Baxter RI (1973) A comparison of the effects of aging, conditioning and skeletal restraint on the tenderness of mutton. Journal of Food Science 38, 932–937.
| A comparison of the effects of aging, conditioning and skeletal restraint on the tenderness of mutton.Crossref | GoogleScholarGoogle Scholar |
Cabassi P (1990) The prediction of lamb carcase composition from objective measurements of fatness taken at slaughter chain speed with the AUS-MEAT sheep probe. Proceedings of the Australian Society of Animal Production 18, 164–167.
CIE (2008) ‘An evaluation of domestic and US lamb marketing.’ (Centre for International Economics: Canberra)
Currie JR (1986) Meeting present and future consumer requirements. Proceedings of the Australian Society of Animal Production 16, 95–96.
Daly BL, Gardner GE, Ferguson DM, Thompson JM (2006) The effect of time off feed prior to slaughter on muscle glycogen metabolism and the rate of pH decline in three different muscles of stimulated and non-stimulated sheep carcasses. Australian Journal of Agricultural Research 57, 1229–1235.
| The effect of time off feed prior to slaughter on muscle glycogen metabolism and the rate of pH decline in three different muscles of stimulated and non-stimulated sheep carcasses.Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BD28XhtFeqsr7M&md5=59f9d2257bcf37dc32a040b6b0f4ee08CAS |
Devine CE, Hopkins DL, Hwang IH, Ferguson DM, Richards I (2004) Electrical stimulation. In ‘Encyclopedia of meat sciences. Vol. 1’. (Eds WK Jensen, CE Devine, M Dikeman) pp. 413–423. (Elsevier: Oxford, UK)
Goers H, Craig P (2008) Sheep feedback systems, Final Report for Project V.MSL.001, Meat & Livestock Australia, Sydney.
Hall DG, Farrell TC, MacDonald BW (1996) Specifications of lamb carcases produced in NSW and retail preferences. Proceedings of the Australian Society of Animal Production 21, 327–330.
Hegarty RS, McPhee MJ, Oddy VH, Thomas DL, Ward LC (1998) Prediction of the chemical composition of lamb carcasses from multi-frequency impedance data. The British Journal of Nutrition 79, 169–176.
| Prediction of the chemical composition of lamb carcasses from multi-frequency impedance data.Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DyaK1cXisl2gtr8%3D&md5=d1ff6e76e3d2ba50f607c43024457786CAS | 9536861PubMed |
Hill W (1992) Market opportunities in Australia and overseas. Proceedings of the Australian Society of Animal Production 19, 175–176.
Hopkins DL (1989) Development of a commercial price schedule for producers and processors of lambs. Australian Journal of Experimental Agriculture 29, 23–27.
| Development of a commercial price schedule for producers and processors of lambs.Crossref | GoogleScholarGoogle Scholar |
Hopkins DL (2008) An industry applicable model for predicting lean meat yield in lamb carcasses. Australian Journal of Experimental Agriculture 48, 757–761.
| An industry applicable model for predicting lean meat yield in lamb carcasses.Crossref | GoogleScholarGoogle Scholar |
Hopkins DL (2010) Technology supporting the development of a product – the case of Australian sheep meat. In ‘Proceedings 14th AAAP Animal Science Congress, Plenary 12, Pingtung, Taiwan’. pp. 315–323.
Hopkins AF, Congram ID (1985) Consumer usage of and attitudes towards lamb. Livestock and Meat Authority of Queensland, Research Report No. 18.
Hopkins DL, Pirlot KL (1993) A database of the carcass weight and fatness of slaughtered lambs. In ‘Proceedings Aust. Meat Ind. Res. Conf., Gold Coast, Queensland, Session 3A’. (CSIRO Division of Food Science and Technology: Brisbane)
Hopkins DL, Thompson JM (2001) The relationship between tenderness, proteolysis, muscle contraction and dissociation of actomyosin. Meat Science 57, 1–12.
| The relationship between tenderness, proteolysis, muscle contraction and dissociation of actomyosin.Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BD3cXmslKltrg%3D&md5=be319d43f7471a9a1fcf74088487a3adCAS |
Hopkins DL, Toohey ES (2006) Eating quality of conventionally chilled sheep meat. Australian Journal of Experimental Agriculture 46, 897–901.
| Eating quality of conventionally chilled sheep meat.Crossref | GoogleScholarGoogle Scholar |
Hopkins DL, Anderson MA, Morgan JE, Hall DG (1995a) A probe to measure GR in lamb carcasses at chain speed. Meat Science 39, 159–165.
| A probe to measure GR in lamb carcasses at chain speed.Crossref | GoogleScholarGoogle Scholar |
Hopkins DL, Wotton JSA, Gamble DJ, Atkinson WR, Slack-Smith TS, Hall DG (1995b) Lamb carcass characteristics 1. The influence of carcass weight, fatness and sex on the weight of trim and traditional cuts. Australian Journal of Experimental Agriculture 35, 33–40.
| Lamb carcass characteristics 1. The influence of carcass weight, fatness and sex on the weight of trim and traditional cuts.Crossref | GoogleScholarGoogle Scholar |
Hopkins DL, Fogarty NM, MacDonald BW (1997) Prediction of lamb carcass yield using video image analysis. In ‘Proceedings 43rd International Congress of Meat Science and Technology, Auckland, New Zealand’. pp. 234–235.
Hopkins D, Littlefield PJ, Thompson JM (2000) The effect on tenderness of super tenderstretching. Asian-Australasian Journal of Animal Science 13, 240
Hopkins DL, Safari E, Fogarty NM (2002) Conformation assessment of lamb carcasses and measurement using VIAScan. Proceedings of the Australian Society of Animal Production 24, 97–100.
Hopkins DL, Safari E, Thompson JM, Smith CR (2004) Video image analysis in the Australian meat industry – precision and accuracy of predicting lean meat yield in lamb carcasses. Meat Science 67, 269–274.
| Video image analysis in the Australian meat industry – precision and accuracy of predicting lean meat yield in lamb carcasses.Crossref | GoogleScholarGoogle Scholar |
Hopkins DL, Hegarty RS, Walker PJ, Pethick DW (2006) Relationship between animal age, intramuscular fat, cooking loss, pH, shear force and eating quality of aged meat from young sheep. Australian Journal of Experimental Agriculture 46, 879–884.
| Relationship between animal age, intramuscular fat, cooking loss, pH, shear force and eating quality of aged meat from young sheep.Crossref | GoogleScholarGoogle Scholar |
Hopkins DL, Toohey ES, Pearce KL, Richards I (2008) Some important changes in the Australian sheep meat processing industry. Australian Journal of Experimental Agriculture 48, 752–756.
| Some important changes in the Australian sheep meat processing industry.Crossref | GoogleScholarGoogle Scholar |
Horgan GW, Murphy SV, Simm G (1995) Automatic assessment of sheep carcasses by image analysis. Animal Science 60, 197–202.
| Automatic assessment of sheep carcasses by image analysis.Crossref | GoogleScholarGoogle Scholar |
Hwang IH, Devine CE, Hopkins DL (2003) The biochemical and physical effects of electrical stimulation on beef and sheep meat tenderness – a review. Meat Science 65, 677–691.
| The biochemical and physical effects of electrical stimulation on beef and sheep meat tenderness – a review.Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BD3sXktVOnsLg%3D&md5=5f7904b29cfe3cc3d3e3d8386ef94984CAS |
Kempster AJ, Jones DW, Wolf BT (1986) A comparison of alternative methods for predicting the carcass composition of crossbred lambs of different breeds and carcasses. Meat Science 18, 89–110.
| A comparison of alternative methods for predicting the carcass composition of crossbred lambs of different breeds and carcasses.Crossref | GoogleScholarGoogle Scholar |
Kirton AH, Johnson DL (1979) Interrelationships between GR and other lamb carcass fatness measurements. Proceedings of the New Zealand Society of Animal Production 39, 194–201.
Kongsro J, Røe M, Kvaal K, Aastveit AH, Egelandsdal B (2009) Prediction of fat, muscle and value in Norwegian lamb carcasses using EUROP classification, carcass shape and length measurements, visible light reflectance and computer tomography (CT). Meat Science 81, 102–107.
| Prediction of fat, muscle and value in Norwegian lamb carcasses using EUROP classification, carcass shape and length measurements, visible light reflectance and computer tomography (CT).Crossref | GoogleScholarGoogle Scholar |
Locker RH, Hagyard CJ (1963) A cold shortening effect in beef muscles. Journal of the Science of Food and Agriculture 14, 787–793.
| A cold shortening effect in beef muscles.Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DyaF2cXlsFOiug%3D%3D&md5=9ecc15cf0ebbef0ae7028081ead95f74CAS |
Morton JD, Bickerstaffe R, Kent MP, Dransfield E, Keeley GM (1999) Calpain-calpastatin and toughness in M. longissimus from electrically stimulated lamb and beef carcasses. Meat Science 52, 71–79.
| Calpain-calpastatin and toughness in M. longissimus from electrically stimulated lamb and beef carcasses.Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DyaK1MXitFGrs7s%3D&md5=a17ed69c9dcafc5565fbc4f7a54b1a40CAS |
O’Halloran W, Semple S, McLeod B (2008) NLIS (sheep and goats) technical and operations barriers reduction. Final Report. CRC for Sheep Industry Innovation, Armidale, NSW, Australia.
Pearce KL, Hopkins DL, Toohey ES, Pethick DW, Richards I (2006) Quantifying the rate of pH and temperature decline in lamb carcasses using mid voltage electrical stimulation in an Australian abattoir. Australian Journal of Experimental Agriculture 46, 869–874.
| Quantifying the rate of pH and temperature decline in lamb carcasses using mid voltage electrical stimulation in an Australian abattoir.Crossref | GoogleScholarGoogle Scholar |
Pearce KL, Hopkins DL, Jacob RH, Williams A, Pethick DW, Phillips JK (2009) Alternating frequency to increase the response to stimulation from medium voltage electrical stimulation and the effect on objective meat quality. Meat Science 81, 188–195.
| Alternating frequency to increase the response to stimulation from medium voltage electrical stimulation and the effect on objective meat quality.Crossref | GoogleScholarGoogle Scholar |
Pearce KL, van de Ven R, Mudford C, Warner RD, Hocking-Edwards J, Jacob R, Pethick DW, Hopkins DL (2010) Case studies demonstrating the benefits of optimising medium voltage electrical stimulation of lamb carcases. Animal Production Science 50, 1107–1114.
Pethick DW, Banks RG, Hales J, Ross IR (2006) Australian prime lamb – a vision for 2020. International Journal of Sheep and Wool Science 54, 66–73.
Pethick DW, Ball AJ, Banks RG, Hocquette JF (2011) Current and future issues facing red meat quality in a competitive market and how to manage continuous improvement. Animal Production Science 51, 13–18.
| Current and future issues facing red meat quality in a competitive market and how to manage continuous improvement.Crossref | GoogleScholarGoogle Scholar |
Russell B, McAlister G, Ross IS, Pethick DW (2005) Lamb and sheep meat eating quality – industry and scientific issues and the need for integrated research. Australian Journal of Experimental Agriculture 45, 465–467.
| Lamb and sheep meat eating quality – industry and scientific issues and the need for integrated research.Crossref | GoogleScholarGoogle Scholar |
Safari E, Channon HA, Hopkins DL, Hall DG, van de Ven R (2002) A national audit of retail lamb loin quality in Australia. Meat Science 61, 267–273.
| A national audit of retail lamb loin quality in Australia.Crossref | GoogleScholarGoogle Scholar |
Shaw FD, Baud SR, Richards I, Pethick DW, Walker PJ, Thompson JM (2005) New electrical stimulation technologies for sheep carcasses. Australian Journal of Experimental Agriculture 45, 575–583.
| New electrical stimulation technologies for sheep carcasses.Crossref | GoogleScholarGoogle Scholar |
Shorthose WR, Powell VH, Harris PV (1986) Influence of electrical stimulation, cooling rates and aging on the shear force values of chilled lamb. Journal of Food Science 51, 889–892, 928.
| Influence of electrical stimulation, cooling rates and aging on the shear force values of chilled lamb.Crossref | GoogleScholarGoogle Scholar |
Stanford K, Richmond RJ, Jones SDM, Robertson MA, Gordon AJ (1998) Video image analysis for on-line classification of lamb carcasses. Animal Science 67, 311–316.
| Video image analysis for on-line classification of lamb carcasses.Crossref | GoogleScholarGoogle Scholar |
Swatland HJ (1981) Cellular heterogeneity in the response of beef to electrical stimulation. Meat Science 5, 451–455.
| Cellular heterogeneity in the response of beef to electrical stimulation.Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DyaL38XjtlGhug%3D%3D&md5=b1d2b457d80c5b13bca94c36c0397793CAS |
Thatcher LP (1992) Development program for the prime lamb industry – the Elite lamb program. Proceedings of the Australian Society of Animal Production 19, 173
Thompson JM, Hopkins DL, D’Sousa D, Walker PJ, Baud SR, Pethick DW (2005) The impact of processing on sensory and objective measurements of sheep meat eating quality. Australian Journal of Experimental Agriculture 45, 561–573.
| The impact of processing on sensory and objective measurements of sheep meat eating quality.Crossref | GoogleScholarGoogle Scholar |
Toohey ES, Hopkins DL (2006) Eating quality of commercially processed hot boned sheep meat. Meat Science 72, 660–665.
| Eating quality of commercially processed hot boned sheep meat.Crossref | GoogleScholarGoogle Scholar |
Toohey ES, Hopkins DL (2009) Change in form and function of hot-boned sheepmeat forequarter. In ‘Proceedings of the 55th International Congress of Meat Science and Technology, Copenhagen, Denmark. Session. pp. 74–77.
Toohey ES, Hopkins DL, McLeod BM, Nielsen SG (2006) Quantifying the rate of pH and temperature decline in lamb carcases at three NSW abattoirs. Australian Journal of Experimental Agriculture 46, 875–878.
| Quantifying the rate of pH and temperature decline in lamb carcases at three NSW abattoirs.Crossref | GoogleScholarGoogle Scholar |
Toohey ES, Hopkins DL, Lamb TA, Neilsen SG, Gutkze D (2008a) Accelerated tenderness of sheep topsides using a meat stretching device. In ‘Proceedings of the 54th International Congress of Meat Science and Technology, 7B.18, Cape Town, South Africa’. pp. 1–3.
Toohey ES, Hopkins DL, Stanley DF, Nielsen SG (2008b) The impact of new generation pre-dressing mid-voltage generation electrical stimulation on tenderness and colour stability in lamb meat. Meat Science 79, 683–691.
| The impact of new generation pre-dressing mid-voltage generation electrical stimulation on tenderness and colour stability in lamb meat.Crossref | GoogleScholarGoogle Scholar |
Toohey ES, Hopkins DL, Nielsen SG, Gutzke D (2009) Impact of a meat stretching device on sheep meat quality. In ‘Proceedings of the 55th International Congress of Meat Science and Technology, Copenhagen, Denmark. Session 4’. pp. 78–82.
Wishmeyer DL, Snowder GD, Clark DH, Cockett NE (1996) Prediction of live lamb chemical composition utilizing electromagnetic scanning. Journal of Animal Science 74, 1864–1872.
