Register      Login
Australian Energy Producers Journal Australian Energy Producers Journal Society
Journal of Australian Energy Producers
RESEARCH ARTICLE

A comparison of fractal methods for evaluation of hydraulic fracturing surface roughness

Abbas Movassagh A C , Xi Zhang A , Elaheh Arjomand A and Manouchehr Haghighi B
+ Author Affiliations
- Author Affiliations

A CSIRO Energy, Melbourne, Vic. 3168, Australia

B University of Adelaide, Adelaide, SA 5005, Australia

C Corresponding author. Email: abbas.movassagh@csiro.au

The APPEA Journal 60(1) 184-196 https://doi.org/10.1071/AJ19058
Submitted: 16 December 2019  Accepted: 23 January 2020   Published: 15 May 2020

Abstract

Surface roughness is a crucial parameter in the hydraulic fracturing process, affecting rock toughness, fluid flow and proppant transport; however, the scale-dependent nature of hydraulic fracture surfaces is not well studied. In this paper, we examined four fractal methods, compass, box-counting, variation and roughness-length, to evaluate and compare the fractal dimension of the surface roughness profiles created by laboratory hydraulic fracturing. Synthetic surface profiles were generated by the Weierstrass-Mandelbrot function, which was initially used to test the accuracy of the four methods. Each profile had a predefined fractal dimension that was revisited by these methods. Then, the fractal analysis was performed for experimental fracture surfaces, which were created by a hydraulic fracturing experiment in a true triaxial situation. By comparing fractal analysis results, we found that for both synthetic and laboratory fracture height profiles, the roughness-length method provides a relatively more reliable estimation of the fractal dimension. This method predicts the dimension for synthetic surface within an error of less than 1%, considering a wide range of surface heights from centimetres down to micrometres. By increasing the fractal dimension of surface profiles, the error of fractal estimation increased for all four methods. Among them, the variation method provided the closest results to the roughness-length method when considering both experimental and synthetic surfaces. The evaluated fractal dimension may provide a guideline for either field- or laboratory-scale hydraulic fracturing treatments to evaluate the effects of surface roughness on fracture growth.

Keywords: box-counting, experimental fracturing, fractal dimension, roughness-length, variation method, Weierstrass-Mandelbrot function.

Abbas Movassagh is a research scientist with CSIRO, and his research focuses on hydraulic fracturing experiments and modelling, including roughness and surface asperities analysis. He is seeking a PhD degree from The University of Adelaide and has gained more than 10 years’ experience in well intervention and reservoir engineering while working at the Middle-East coordinating numerous completion and treatment design and feasibility studies.

Xi Zhang is a principal research scientist with the CSIRO Energy Business Unit. He has over 18 years’ experience in hydraulic fracture modelling. He holds a PhD degree from the University of Sydney.

Elaheh Arjomand started her post-doc fellowship with CSIRO in mid-2019 and her research is mainly focused on the integrity of wells after decommissioning and abandonment. Elaheh received her PhD on the integrity of the cement sheath after being subjected to pressure and temperature variations from the University of Adelaide in 2018.

Manouchehr (Manny) Haghighi is Associate Professor of Petroleum Engineering at the University of Adelaide. His research and teaching focus is on unconventional reservoirs, reservoir simulation, well testing and formation evaluation. He has supervised more than 40 MSc and 10 PhD students. Manouchehr has published more than 100 articles in peer reviewed journals and presented at numerous international conferences.


References

Bahat, D., Bankwitz, P., and Bankwitz, E. (2003). Preuplift joints in granites: Evidence for subcritical and postcritical fracture growth. Geological Society of America Bulletin 115, 148–165.
Preuplift joints in granites: Evidence for subcritical and postcritical fracture growth.Crossref | GoogleScholarGoogle Scholar |

Berry, M. V., and Lewis, Z. V. (1980). On the Weierstrass-Mandelbrot Fractal Function. Proc R Soc London A Math Phys Eng Sci 370, .
On the Weierstrass-Mandelbrot Fractal Function.Crossref | GoogleScholarGoogle Scholar |

Borodich, F. (1999). Fractals and fractal scaling in fracture mechanics. International Journal of Fracture 95, 239.
Fractals and fractal scaling in fracture mechanics.Crossref | GoogleScholarGoogle Scholar |

Bouchaud, E. (1997). Scaling properties of cracks. Journal of Physics Condensed Matter 9, 4319–4344.
Scaling properties of cracks.Crossref | GoogleScholarGoogle Scholar |

Bouchaud, E., Lapasset, G., and Planès, J. (1990). Fractal dimension of fractured surfaces: A universal value? EPL 13, 73–79.
Fractal dimension of fractured surfaces: A universal value?Crossref | GoogleScholarGoogle Scholar |

Britt, L. K., Hager, C. J., and Thompson, J. W. (1994) Hydraulic Fracturing in a Naturally Fractured Reservoir. In ‘International Petroleum Conference and Exhibition of Mexico, 10–13 October, Veracruz, Mexico.’ (Society of Petroleum Engineers.) 10.2118/28717-MS

Chen, Z., Liu, Y., and Zhou, P. (2018). A comparative study of fractal dimension calculation methods for rough surface profiles. Chaos, Solitons, and Fractals 112, 24–30.
A comparative study of fractal dimension calculation methods for rough surface profiles.Crossref | GoogleScholarGoogle Scholar |

Develi, K., and Babadagli, T. (1998). Quantification of Natural Fracture Surfaces Using Fractal Geometry. Mathematical Geology 30, 971–998.
Quantification of Natural Fracture Surfaces Using Fractal Geometry.Crossref | GoogleScholarGoogle Scholar |

Dubuc, B., Roques-Carmes, C., Tricot, C., and Zucker, S. W. (1987) The variation method: a technique to estimate the fractal dimension of surfaces. In: ‘SPIE Proceedings Vol. 0845, Visual Communications and Image Processing II.’ (Ed. T. R. Hsing.) pp 241–249. (SPIE: Bellingham, WA.)

Dubuc, B., Quiniou, J. F., Roques-Carmes, C., Tricot, C., and Zucker, S. W. (1989). Evaluating the fractal dimension of profiles. Physical Review A. 39, 1500–1512.
Evaluating the fractal dimension of profiles.Crossref | GoogleScholarGoogle Scholar |

Huang, X., Yuan, P., Zhang, H., Han, J., Mezzatesta, A., and Bao, J. (2017). Numerical Study of Wall Roughness Effect on Proppant Transport in Complex Fracture Geometry. In ‘SPE Middle East Oil & Gas Show and Conference, 6–9 March, Manama, Kingdom of Bahrain.’ (Society of Petroleum Engineers.) 10.2118/183818-MS

Huang, H., Babadagli, T., Andy Li, H., and Develi, K. (2018). Visual Analysis on the Effects of Fracture-Surface Characteristics and Rock Type on Proppant Transport in Vertical Fractures. In ‘SPE Hydraulic Fracturing Technology Conference and Exhibition, 23-25 January, The Woodlands, Texas, USA.’ (Society of Petroleum Engineers.) 10.2118/189892-MS

Humphrey, J. A. C., Schuler, C. A., and Rubinsky, B. (1992). On the use of the Weierstrass-Mandelbrot function to describe the fractal component of turbulent velocity. Fluid Dynamics Research 9, 81–95.
On the use of the Weierstrass-Mandelbrot function to describe the fractal component of turbulent velocity.Crossref | GoogleScholarGoogle Scholar |

INRIA. (2015). Fraclab 2.2, A Fractal Analysis Toolbox for Signal and Image Processing. Institut National de Recherche en Informatique et Automatique. Available at http://fraclab.saclay.inria.fr [Verified 11 February 2020]

Isichenko, M. B. (1992). Percolation, statistical topography, and transport in random media. Reviews of Modern Physics 64, 961.
Percolation, statistical topography, and transport in random media.Crossref | GoogleScholarGoogle Scholar |

Kassis, S., and Sondergeld, C. (2010). Fracture Permeability of Gas Shale: Effects of Roughness, Fracture Offset, Proppant, and Effective Stress. In ‘International Oil and Gas Conference and Exhibition in China, 8–10 June, Beijing, China.’ (Society of Petroleum Engineers.) 10.2118/131376-MS

Klinkenberg, B. (1994). A review of methods used to determine the fractal dimension of linear features. Mathematical Geology 26, 23–46.
A review of methods used to determine the fractal dimension of linear features.Crossref | GoogleScholarGoogle Scholar |

Klinkenberg, B., and Goodchild, M. F. (1992). The fractal properties of topography: A comparison of methods. Earth Surface Processes and Landforms 17, 217–234.
The fractal properties of topography: A comparison of methods.Crossref | GoogleScholarGoogle Scholar |

Lee, Y. H., Carr, J. R., Barr, D. J., and Haas, C. J. (1990). The fractal dimension as a measure of the roughness of rock discontinuity profiles. International Journal of Rock Mechanics and Mining Sciences 27, 453–464.
The fractal dimension as a measure of the roughness of rock discontinuity profiles.Crossref | GoogleScholarGoogle Scholar |

Li, C.-G., Dong, S., and Zhang, G.-X. (2000). Evaluation of the anisotropy of machined 3D surface topography. Wear 237, 211–216.
Evaluation of the anisotropy of machined 3D surface topography.Crossref | GoogleScholarGoogle Scholar |

Li, Y., Xu, J., Yan, F., Zeng, S., Cheng, X., and Zhang, F. (2015). Hydraulic Fracturing in HPHT Deep Naturally Fractured Reservoir in China. In ‘SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, 20-22 October, Nusa Dua, Bali, Indonesia.’ (Society of Petroleum Engineers.) 10.2118/176070-MS

Liang, X., Lin, B., Han, X., and Chen, S. (2012). Fractal analysis of engineering ceramics ground surface. Applied Surface Science 258, 6406–6415.
Fractal analysis of engineering ceramics ground surface.Crossref | GoogleScholarGoogle Scholar |

Liu, Y., Wang, Y., Chen, X., Zhang, C., and Tan, Y. (2017). Two-stage method for fractal dimension calculation of the mechanical equipment rough surface profile based on fractal theory. Chaos, Solitons, and Fractals 104, 495–502.
Two-stage method for fractal dimension calculation of the mechanical equipment rough surface profile based on fractal theory.Crossref | GoogleScholarGoogle Scholar |

Long, M., and Peng, F. (2013). A box-counting method with adaptable box height for measuring the fractal feature of images. Radioengineering 22, 208–213.
A box-counting method with adaptable box height for measuring the fractal feature of images.Crossref | GoogleScholarGoogle Scholar |

Majumdar, A., and Tien, C. L. (1990). Fractal characterization and simulation of rough surfaces. Wear 136, 313–327.
Fractal characterization and simulation of rough surfaces.Crossref | GoogleScholarGoogle Scholar |

Malinverno, A. (1990). A simple method to estimate the fractal dimension of a self‐affine series. Geophysical Research Letters 17, 1953–1956.
A simple method to estimate the fractal dimension of a self‐affine series.Crossref | GoogleScholarGoogle Scholar |

Mandelbrot, B. B. (1985). Self-affine fractals and fractal dimension. Physica Scripta 32, 257.
Self-affine fractals and fractal dimension.Crossref | GoogleScholarGoogle Scholar |

Movassagh, A., Haghighi, M., Kasperczyk, D., Sayyafzadeh, M., and Zhang, X. (2018). An experimental investigation into surface roughness of a hydraulic fracture. The APPEA Journal 58, 728–732.
An experimental investigation into surface roughness of a hydraulic fracture.Crossref | GoogleScholarGoogle Scholar |

Pollard, D. D., and Aydin, A. (1988). Progress in understanding jointing over the past century. Geological Society of America Bulletin 100, 1181–1204.
Progress in understanding jointing over the past century.Crossref | GoogleScholarGoogle Scholar |

Ponson, L., Shabir, Z., Van Der Giessen, E., and Simone, A. (2017). Brittle intergranular fracture of 2D disordered solids as a random walk. (Under review). Pre-print available at http://laurentponson.com/assets/crack-path-as-a-random-walk_preprint_16.pdf [verified 27 February 2020].

Power, W. L., and Tullis, T. E. (1991). Euclidean and fractal models for the description of rock surface roughness. Journal of Geophysical Research 96, 415–424.
Euclidean and fractal models for the description of rock surface roughness.Crossref | GoogleScholarGoogle Scholar |

Raimbay, A., Babadagli, T., Kuru, E., and Develi, K. (2014). Effect of Fracture Surface Roughness and Shear Displacement on Permeability and Proppant Transportation in a Single Fracture. In ‘SPE/CSUR Unconventional Resources Conference – Canada, 30 September–2 October, Calgary, Alberta, Canada.’ (Society of Petroleum Engineers.) 10.2118/171577-MS

Rivard, C., Lavoie, D., Lefebvre, R., Séjourné, S., Lamontagne, C., and Duchesne, M. (2014). An overview of Canadian shale gas production and environmental concerns. International Journal of Coal Geology 126, 64–76.
An overview of Canadian shale gas production and environmental concerns.Crossref | GoogleScholarGoogle Scholar |

Sornette, A., Davy, P., and Sornette, D. (1990). Growth of fractal fault patterns. Physical Review Letters 65, 2266.
Growth of fractal fault patterns.Crossref | GoogleScholarGoogle Scholar | 10042501PubMed |

Tsang, Y. W., and Witherspoon, P. A. (1983). The dependence of fracture mechanical and fluid flow properties on fracture roughness and sample size. Journal of Geophysical Research 88, 2359–2366.
The dependence of fracture mechanical and fluid flow properties on fracture roughness and sample size.Crossref | GoogleScholarGoogle Scholar |

van Dam, D. B., and de Pater, C. J. (2001). Roughness of Hydraulic Fractures: Importance of In-Situ Stress and Tip Processes. SPE Journal 6, 4–13.
Roughness of Hydraulic Fractures: Importance of In-Situ Stress and Tip Processes.Crossref | GoogleScholarGoogle Scholar |

Wang, L., and Xiang, Y. (2013). A Method to Determine the Fractal Roughness Parameter from Surface Profiles Generated by the WM Function. In ‘Applied Mechanics and Materials, Vol. 341–342’. (Ed. W. Y. Fan.) pp 329–332. (Trans Tech Publications: Switzerland) 10.4028/www.scientific.net/AMM.341-342.329

Wang, Q., Chen, X., Jha, A. N., and Rogers, H. (2014). Natural gas from shale formation – The evolution, evidences and challenges of shale gas revolution in United States. Renewable & Sustainable Energy Reviews 30, 1–28.
Natural gas from shale formation – The evolution, evidences and challenges of shale gas revolution in United States.Crossref | GoogleScholarGoogle Scholar |

Wilson, T. H. (2000). Some distinctions between self-similar and self-affine estimates of fractal dimension with case history. Mathematical Geology 32, 319–335.
Some distinctions between self-similar and self-affine estimates of fractal dimension with case history.Crossref | GoogleScholarGoogle Scholar |

Wu, J.-J. (2000). Characterization of fractal surfaces. Wear 239, 36–47.
Characterization of fractal surfaces.Crossref | GoogleScholarGoogle Scholar |

Zhang, X., Xu, Y., and Jackson, R. L. (2017). An analysis of generated fractal and measured rough surfaces in regards to their multi-scale structure and fractal dimension. Tribology International 105, 94–101.
An analysis of generated fractal and measured rough surfaces in regards to their multi-scale structure and fractal dimension.Crossref | GoogleScholarGoogle Scholar |

Zillur, R., Bartko, K., and Al-Qahtani, M. Y. (2002) Hydraulic Fracturing Case Histories in the Carbonate and Sandstone Reservoirs of Khuff and Pre-Khuff Formations, Ghawar Field, Saudi Arabia. In ‘SPE Annual Technical Conference and Exhibition, 29 September–2 October, San Antonio, Texas.’ (Society of Petroleum Engineers.) 10.2118/77677-MS