
%0 Journal Article
%A Williams, CH 
%T Moisture uptake by surface-applied superphosphate and movement of the phosphate and sulphate into the soil
%J Soil Research
%D 1969/12/01
%V 7
%N 3
%P 307-316
%K 
%R https://doi.org/10.1071/SR9690307
%U https://www.publish.csiro.au/paper/SR9690307 
%X Capillary uptake of soil water appeared to be more important than hygroscopic uptake of moisture by monocalcium phosphate in the wetting of surface-applied superphosphate particles. For hygroscopic uptake of water a relative humidity greater than 89% was found necessary, but particles on the soil surface are exposed to atmospheric humidity which is frequently well below 89%. This may prevent uptake of moisture from soils of low moisture content. The rate of moisture uptake from the vapour phase by superphosphate increased directly with increase in relative humidity above 89%. The rate of uptake was also influenced by temperature and surface area of the particle. Capillary uptake of soil water was influenced by soil moisture content, density of the particles, and the degree of contact between soil and particle. Movement of phosphate from the moist particle into the soil was rapid but the rate was affected by soil moisture, temperature, contact with the soil, and certain physical properties of the particle. In contrast to phosphate, movement of sulphate into the soil was slow because of the low solubility of calcium sulphate, and was greatly influenced by particle size. Leaching by rainfall may be an important factor in the movement of sulphate from coarse particles. 
