Articles citing this paper
Microfabrication of low-cost customisable counting chambers for standardised estimation of sperm concentration
Yue Liu A B , Megan Chesnut B , Amy Guitreau B , Jacob Beckham A , Adam Melvin C , Jason Eades A , Terrence R. Tiersch B and William Todd Monroe
A D
+ Author Affiliations
- Author Affiliations
A Department of Biological and Agricultural Engineering, Louisiana State University, E. B. Doran Building, Baton Rouge, LA 70803, USA.
B Aquatic Germplasm and Genetic Resources Center, School of Renewable Natural Resources, Louisiana State University Agricultural Center, 2288 Gourrier Avenue, Baton Rouge, LA 70820, USA.
C Cain Department of Chemical Engineering, Louisiana State University, 3314F Patrick F. Taylor Hall, Baton Rouge, LA 70803, USA.
D Corresponding author. Email: tmonroe@lsu.edu
Reproduction, Fertility and Development 32(9) 873-878 https://doi.org/10.1071/RD19154
Submitted: 3 May 2019 Accepted: 20 December 2019 Published: 27 May 2020
10 articles found in Crossref database.
Development of a Single-Piece Sperm Counting Chamber (SSCC) for Aquatic Species
Belgodere Jorge A.,
Liu Yue,
Reich Elizabeth L.,
Eades Jason,
Tiersch Terrence R., Monroe William Todd
Fishes. 2022 7(5). p.231
Cryopreservation of Hydractinia symbiolongicarpus Sperm to Support Community-Based Repository Development for Preservation of Genetic Resources
Huene Aidan L.,
Koch Jack C.,
Arregui Lucía,
Liu Yue,
Nicotra Matthew L.,
Weis Virginia M., Tiersch Terrence R.
Animals. 2022 12(19). p.2537
Initial assessment of the toxicologic effects of leachates from 3-dimensional (3-D) printed objects on sperm quality in two model fish species
Schwing Matthew J.,
Liu Yue,
Belgodere Jorge A.,
Monroe William T.,
Tiersch Terrence R., Abdelmoneim Ahmed
Aquatic Toxicology. 2023 256 p.106400
Design, alpha testing, and beta testing of a 3-D printed open-hardware portable cryopreservation device for aquatic species
Childress William M.,
Liu Yue, Tiersch Terrence R.
Journal of Applied Aquaculture. 2023 35(1). p.213
Low-Cost Resin 3-D Printing for Rapid Prototyping of Microdevices: Opportunities for Supporting Aquatic Germplasm Repositories
Zuchowicz Nikolas C.,
Belgodere Jorge A.,
Liu Yue,
Semmes Ignatius,
Monroe William Todd, Tiersch Terrence R.
Fishes. 2022 7(1). p.49
An automated modular open-technology device to measure and adjust concentration of aquatic sperm samples for cryopreservation
Zuchowicz Nikolas,
Liu Yue,
Monroe W. Todd, Tiersch Terrence R.
SLAS Technology. 2023 28(1). p.43
The Need for a Framework Addressing the Temporal Aspects of Fish Sperm Motility Leading to Community-Level Standardization
Blackburn Harvey,
Torres Leticia,
Liu Yue, Tiersch Terrence R.
Zebrafish. 2022 19(4). p.119
Evaluation of industrial and consumer 3-D resin printer fabrication of microdevices for quality management of genetic resources in aquatic species
Hosseini Seyedmajid,
Koch Jack C.,
Liu Yue,
Semmes Ignatius,
Nahmens Isabelina,
Monroe W. Todd,
Xu Jian, Tiersch Terrence R.
Micro and Nano Engineering. 2024 24 p.100277
The emerging role of open technologies for community-based improvement of cryopreservation and quality management for repository development in aquatic species
Liu Yue,
Todd Monroe W.,
Belgodere Jorge A.,
Choi Jin-Woo,
Teresa Gutierrez-Wing M., Tiersch Terrence R.
Animal Reproduction Science. 2022 246 p.106871
Development of an open hardware 3-D printed conveyor device for continuous cryopreservation of non-batched samples
Liu Yue,
Eskridge Melissa,
Guitreau Amy,
Beckham Jacob,
Chesnut Megan,
Torres Leticia,
Tiersch Terrence R., Monroe William Todd
Aquacultural Engineering. 2021 95 p.102202
