Articles citing this paper
Generalised Least-squares Determination of Triaxial Stress States by X-ray Diffraction and the Associated Errors
RA Winholtz and JB Cohen
41(2) pp.189 - 200
86 articles found in Crossref database.
Triaxial stress distributions in Cu/low-k interconnect features
Murray Conal E.,
Besser Paul R.,
Ryan E. Todd, Jordan-Sweet Jean L.
Applied Physics Letters. 2011 98(6).
Practical Residual Stress Measurement Methods (2013)
Chemical vapor deposited alumina hard coatings: Residual stress states decisively determined by the physical material properties
Schoderböck Peter
Materialia. 2022 21 p.101338
Measurement of residual stresses in Al2O3/Ni laminated composites using an X-ray diffraction technique
Hehn L.,
Zheng C.,
Mecholsky J. J., Hubbard C. R.
Journal of Materials Science. 1995 30(5). p.1277
Residual Stress Analysis of Al Alloy Thin Films by X-Ray Diffraction as a Function of Film Thickness
Shute Carla J.,
Cohen J. B., Jeannottea D. A.
MRS Proceedings. 1988 130
Residual Strains in an Al2O3‐Ni Joint Bonded with a Composite Interlayer: Experimental Measurements and FEM Analyses
Rabin Barry H.,
Williamson Richard L.,
Bruck Hugh A.,
Wang Xun‐Li,
Watkins Thomas R.,
Feng Yue‐Zhong, Clarke David R.
Journal of the American Ceramic Society. 1998 81(6). p.1541
The effect of assuming the principal directions in neutron diffraction measurement of stress tensors
Winholtz R.A., Krawitz A.D.
Materials Science and Engineering: A. 1996 205(1-2). p.257
Methods for Depth Profiling Complete Stress Tensors Using Neutron Diffraction
Winholtz R.A., Krawitz A.D.
Advances in X-ray Analysis. 1993 37 p.253
An analytic and generalized formulation of the sin2ψ-method
Ortner Balder
Zeitschrift für Metallkunde. 2005 96(9). p.1049
Phase transition in AISI 304 during rolling contact wear and its monitoring via Barkhausen noise emission
Neslušan M.,
Bašťovanský R.,
Čep R.,
Minárik P.,
Trojan K., Florková Z.
Wear. 2024 558-559 p.205563
Load sharing between austenite and ferrite in a duplex stainless steel during cyclic loading
Johansson Johan, Odén Magnus
Metallurgical and Materials Transactions A. 2000 31(6). p.1557
Deformation behaviour of a prestrained duplex stainless steel
Moverare Johan J, Odén Magnus
Materials Science and Engineering: A. 2002 337(1-2). p.25
Fracture of a textured anisotropic ceramic
Zimmerman M.H,
Baskin D.M,
Faber K.T,
Fuller E.R,
Allen A.J, Keane D.T
Acta Materialia. 2001 49(16). p.3231
Use of position-dependent stress-free standards for diffraction stress measurements
Krawitz A.D., Winholtz R.A.
Materials Science and Engineering: A. 1994 185(1-2). p.123
The effects of residual macrostresses and microstresses on fatigue crack initiation
Almer J.D.,
Cohen J.B., Moran B.
Materials Science and Engineering: A. 2000 284(1-2). p.268
Multibit ferroelectric field-effect transistor with epitaxial-like Pb(Zr,Ti)O3
Park Jae Hyo,
Kim Hyung Yoon,
Seok Ki Hwan,
Kiaee Zohreh,
Lee Sol Kyu, Joo Seung Ki
Journal of Applied Physics. 2016 119(12).
Research progress of residual stress measurement methods
Li Xuewen,
Liu Jiwei,
Wu Hao,
Miao Kesong,
Wu He,
Li Rengeng,
Liu Chenglu,
Fang Wenbin, Fan Guohua
Heliyon. 2024 10(7). p.e28348
Determining Stresses in Composites
Cohen J. B.
Advances in X-ray Analysis. 1991 35(A). p.439
Springer Handbook of Experimental Solid Mechanics (2008)
X-Ray Diffraction Investigation of Triaxial Residual Stresses in Composite Materials
Fenn R.H.,
Jones A.M., Wells G.M.
Journal of Composite Materials. 1993 27(14). p.1338
Why we should give up the sin2ψ method
Ortner Balder
Powder Diffraction. 2009 24(S1). p.S16
Residual stress determination in thin films by X-ray diffraction and the widespread analytical practice applying a biaxial stress model: An outdated oversimplification?
Schoderböck Peter, Köstenbauer Harald
Applied Surface Science. 2021 541 p.148531
Influence of Beam Speed on Residual Stresses in the Vicinity of Laser Welds
Ganev Nikolaj,
Kolařík Kamil,
Pala Zdenek,
Němeček Stanislav, Čapek Jiří
Advanced Materials Research. 2014 996 p.463
A comparison of X-ray stress measurement methods based on the fundamental equation
Miyazaki Toshiyuki, Sasaki Toshihiko
Journal of Applied Crystallography. 2016 49(2). p.426
Residual stress estimation in laminated ZrB2-SiC ultra-high temperature ceramics with strong interfaces using X-ray diffraction and indentation techniques
Zhou Peng,
Jin Xinxin,
Chen Jing,
Zhou Yinghao,
Luo Jiapeng,
Li Huixing,
Chu Chenglin, Yan Ming
Ceramics International. 2017 43(15). p.12459
Residual Stresses in a Wo‐Phase Microcracking Ceramic
Maglev David J.,
Winholtz R. A., Fabe K.T.
Journal of the American Ceramic Society. 1990 73(6). p.1641
Residual Stresses and the Microstructure of Modeled Laser-Hardened Railway Axle Seats under Fatigue
Čapek Jiří,
Trojan Karel,
Kec Jan,
Ganev Nikolaj,
Černý Ivo, Mužík Tomáš
Metals. 2024 14(3). p.290
On accounting for preferred crystallite orientations in determination of average elastic strain by diffraction
Morawiec A.
Journal of Applied Crystallography. 2018 51(1). p.148
Advances in X-Ray Analysis (1997)
Counting Statistical Errors in Principal Stresses and Directions Determined by Diffraction
Witte D.A.,
Winholtz R.A., Neal S.P.
Advances in X-ray Analysis. 1993 37 p.265
Assessing the Validity of Diffraction Stress Data with the Goodness-Of-Fit Statistic
Lohkamp Thomas A., Winhoitz R. A.
Advances in X-ray Analysis. 1995 39 p.281
Non-Destructive Inspection of Surface Integrity in Milled Turbine Blades of Inconel 738LC
Kolařík Kamil,
Pala Zdenek,
Beranek Libor,
Čapek Jiří,
Vyskocil Zdenek, Ganev Nikolaj
Applied Mechanics and Materials. 2013 486 p.9
Toughening Mechanisms in Quasi-Brittle Materials (1991)
Properties and general use of the X-ray elastic factors
Ortner Balder
Powder Diffraction. 2007 22(2). p.103
Residual stress analysis in industrial parts: a comprehensive comparison of XRD methods
Sarmast Ardeshir,
Schubnell Jan,
Preußner Johannes,
Hinterstein Manuel, Carl Eva
Journal of Materials Science. 2023 58(44). p.16905
Changes in the macrostresses and microstresses in steel with fatigue
Winholtz R.A., Cohen J.B.
Materials Science and Engineering: A. 1992 154(2). p.155
The relaxation of residual stresses with postweld heat treatment in a high-performance weld measured with neutron diffraction
Winholtz R. A., Krawitz A. D.
Metallurgical and Materials Transactions A. 1995 26(5). p.1287
A comparison of different distributions of azimuth angles in the sin2 ψ-method
Ortner Balder
International Journal of Materials Research. 2007 98(2). p.87
Temperature-dependent residual stresses in a hetero-epitaxial thin film system
Liu M.,
Ruan H.H.,
Zhang L.C., Moridi A.
Thin Solid Films. 2015 584 p.186
Functionally Graded Materials 1996 (1997)
The effects of residual macrostresses and microstresses on fatigue crack propagation
Almer J. D.,
Cohen J. B., Winholtz R. A.
Metallurgical and Materials Transactions A. 1998 29(8). p.2127
Structural and Residual Stress Analysis by Nondestructive Methods (1997)
Elastic-strain tensor by Rietveld refinement of diffraction measurements
Balzar Davor,
Von Dreele Robert B.,
Bennett Kristin, Ledbetter Hassel
Journal of Applied Physics. 1998 84(9). p.4822
The Matrix Method for Data Evaluation and its Advantages in Comparison to the Sin2ψ and Similar Methods
Ortner Balder
Materials Science Forum. 2011 681 p.7
Powder metallurgy and process induced residual stress states: A case distinction by X-ray diffraction
Schoderböck Peter
Materialia. 2020 12 p.100714
Influence of elastic and plastic anisotropy on the flow behavior in a duplex stainless steel
Moverare Johan J., Odén Magnus
Metallurgical and Materials Transactions A. 2002 33(1). p.57
Advances in X-Ray Analysis (1997)
Study of Residual Stress Surface Distribution on Laser Welded Steel Sheets
Pala Zdenek,
Kolařík Kamil,
Ganev Nikolaj, Čapek Jiří
Applied Mechanics and Materials. 2013 486 p.3
Residual stress relief of welded joints by mechanical vibrations
Chuvas Tatiane C.,
Castello Daniel A., Cindra Fonseca Maria P.
Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2016 38(8). p.2449
Analysis of Residual Stress by Diffraction using Neutron and Synchrotron Radiation (2003)
Resonance bending fatigue testing with simultaneous damping measurement and its application on layered coatings
Kovářík Ondřej,
Haušild Petr,
Čapek Jiří,
Medřický Jan,
Siegl Jan,
Mušálek Radek,
Pala Zdeněk,
Curry Nicholas, Björklund Stefan
International Journal of Fatigue. 2016 82 p.300
Proposed Methods for Depth Profiling of Residual Stresses using Grazing Incidence X-Ray Diffraction (GIXD)
Predecki Paul,
Zhu X., Ballard B.
Advances in X-ray Analysis. 1992 36 p.237
Residual Stress Depth Profiling on Ground and on Polished Surfaces of an Al2O3/SiC(w) Composite
Zhu X.,
Predecki P.,
Eatough M., Goebner R.
Advances in X-ray Analysis. 1995 39 p.371
Load sharing of the phases in 1080 steel during low-cycle fatigue
Winholtz R. A., Cohen J. B.
Metallurgical Transactions A. 1992 23(1). p.341
Study on the Statistical Errors in X-Ray Stress Measurement with Two-Dimensional Detector
Ejiri Shoichi,
Ohba Hiroaki, Sasaki Toshihiko
Materials Science Forum. 2018 941 p.2373
Depth dependence of residual strains in polycrystalline Mo thin films using high-resolution x-ray diffraction
Malhotra S. G.,
Rek Z. U.,
Yalisove S. M., Bilello J. C.
Journal of Applied Physics. 1996 79(9). p.6872
Methodology for Combined Neutron Diffraction and Bragg Edge Imaging
Woracek R.,
Bunn J.R.,
Penumadu D.,
Tremsin A.,
Siriruk A.,
Kardjilov N.,
Manke I.,
Boin M.,
Hilger A.,
Hubbard C.R.,
Clausen B., Sisneros T.A.
MRS Proceedings. 2013 1528
Advances in X-Ray Analysis (1994)
Measurement of Residual and Applied Stress Using Neutron Diffraction (1992)
Investigation of complex residual stress states in the near-surface region: Evaluation of the complete stress tensor by X-ray diffraction pattern decomposition
Schoderböck Peter
Applied Surface Science. 2019 466 p.151
An analytic and generalized formulation of the sin2
ψ-method
Ortner Balder
International Journal of Materials Research. 2022 96(9). p.1049
Linearized analysis of X-ray stress measurement using the Debye–Scherrer ring
Miyazaki Toshiyuki, Sasaki Toshihiko
International Journal of Materials Research. 2015 106(9). p.1002
An Analysis of Macro- and Microstresses Around a Fatigue Crack Tip
Almer J. D.,
Cohen J. B.,
Kirk W. D., Winholtz R. A.
Advances in X-ray Analysis. 1995 39 p.353
Real Structure of Milled Inconel 738LC Turbine Blades
Pala Zdenek,
Kolařík Kamil,
Beranek Libor,
Čapek Jiří,
Kyncl Jiří,
Mušálek Radek, Ganev Nikolaj
Advanced Materials Research. 2014 996 p.646
On the Weldability of Thick P355NL1 Pressure Vessel Steel Plates Using Laser Welding
Čapek Jiří,
Trojan Karel,
Kec Jan,
Černý Ivo,
Ganev Nikolaj, Němeček Stanislav
Materials. 2020 14(1). p.131
Residual stresses in YAG phase in directionally solidified eutectic Al2O3/YAG ceramic composite estimated by X-ray diffraction
Sha J.J.,
Ochiai S.,
Okuda H.,
Waku Y.,
Nakagawa N.,
Mitani A.,
Sato M., Ishikawa T.
Journal of the European Ceramic Society. 2008 28(12). p.2319
Surface Layers' Real Structure of Metals Exposed to Inhomogeneous Thermal Fields and Plastic Deformation
Pala Zdenek,
Ganev N.,
Drahokoupil Jan, Sveshnikov Alexej
Solid State Phenomena. 2010 163 p.59
Least-squares refinement of biaxial stress components and unit-cell parameter in a 〈111〉 textured cubic TiN polycrystalline thin film by X-ray diffraction
Yokoyama Ryouichi,
Harada Jimpei, Akiniwa Yoshiaki
Powder Diffraction. 2010 25(1). p.25
Combining XRD with Hole-Drilling Method in Residual Stress Gradient Analysis of Laser Hardened C45 Steel
Kolařík Kamil,
Pala Zdenek,
Ganev Nikolaj, Fojtik Frantisek
Advanced Materials Research. 2014 996 p.277
Interfacial characterization and residual stress analysis in diamond films on LiNbO3
Jagannadham K.,
Watkins T. R., Lance M. J.
Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films. 2006 24(6). p.2105
Creep‐Induced Residual Stress Strengthening in a Nicalon‐Fiber‐Reinforced BMAS‐Glass‐Ceramic‐Matrix Composite
Widjaja Sujanto,
Jakus Karl,
Ritter John E.,
Lara‐Curzio Edgar,
Watkins Thomas R.,
Sun Ellen Y., Brennan John J.
Journal of the American Ceramic Society. 1999 82(3). p.657
Mechanical Behavior of Alumina Reinforced with Carbon‐Coated Silicon Carbide Whiskers
Steyer Todd E., Faber K. T.
Journal of the American Ceramic Society. 1995 78(10). p.2673
Geometry of X‐ray based measurement of residual strain at desired penetration depth
Morawiec A.
physica status solidi (a). 2017 214(10).
Component test for the assessment of delayed hydrogen-assisted cracking in thick-walled SAW joints for offshore applications
Rhode Michael,
Kromm Arne,
Mente Tobias,
Brackrock Daniel,
Czeskleba Denis, Kannengiesser Thomas
Welding in the World. 2024 68(3). p.621
Advances in X-Ray Analysis (1997)
Thermally-induced formation of hexagonal AlN in AlCrN hard coatings on sapphire: Orientation relationships and residual stresses
Bartosik M.,
Daniel R.,
Mitterer C., Keckes J.
Surface and Coatings Technology. 2010 205(5). p.1320
Fatigue Performance of TBCs on Hastelloy X Substrate During Cyclic Bending
Musalek Radek,
Kovarik Ondrej,
Tomek Libor,
Medricky Jan,
Pala Zdenek,
Hausild Petr,
Capek Jiri,
Kolarik Kamil,
Curry Nicholas, Bjorklund Stefan
Journal of Thermal Spray Technology. 2016 25(1-2). p.231
Understanding stress gradients in microelectronic metallization
Murray Conal E.,
Ryan E. Todd,
Besser Paul R.,
Witt Christian,
Jordan-Sweet Jean L., Toney Michael F.
Powder Diffraction. 2012 27(2). p.92
Effect of Multi-Axial Loading on Residual Strain Tensor for 12L14 Steel Alloy
Bunn Jeffrey R.,
Penumadu Dayakar,
Lou Xin, Hubbard Camden R.
Metallurgical and Materials Transactions A. 2014 45(9). p.3806
Advances in X-Ray Analysis (1993)
X-ray stress analysis with a 2D detector. Part 1. Data acquisition and treatment strategies
François Manuel
Journal of Applied Crystallography. 2023 56(1). p.48
Analysis of the biaxial strain state of Al-doped c-BN films using diffraction experiments with synchrotron radiation
Linss Volker,
Halm Thorsten,
Hoyer Walter,
Richter Frank, Schell Norbert
Vacuum. 2003 70(1). p.1
The character of sintering under vacuum and its use in hot isostatic pressing in comparison with the air pre-sintering and slurry coating techniques for alumina–zirconia composites
Zhang Fa-jian,
Yang Liu,
Huang Xiang-yang, Zhu De-gui
Journal of Materials Processing Technology. 1998 74(1-3). p.115
Residual Stresses in Alumina/Silicon Carbide (Whisker) Composites by X‐ray Diffraction
Abuhasan Alias,
Balasingh Chelleyan, Predecki Paul
Journal of the American Ceramic Society. 1990 73(8). p.2474
Study of residual stresses, microstructure, and hardness in FeB and Fe2B ultra-hard layers
Pala Zdenek,
Fojtikova Jaroslava,
Koubsky Tomas,
Musalek Radek,
Strasky Josef,
Capek Jiri,
Kyncl Jiri,
Beranek Libor, Kolarik Kamil
Powder Diffraction. 2015 30(S1). p.S83
Are data correctly fitted by the sin2 ψ and similar methods?
Ortner Balder
International Journal of Materials Research. 2008 99(9). p.933
