
%0 Journal Article
%A Bona, Andrej 
%A Pevzner, Roman 
%T Distributed Acoustic Sensing for Mineral Exploration: Case Study
%J ASEG Extended Abstracts
%D 2018/02/26
%V 2018
%N 1
%P 1-4
%K 
%R https://doi.org/10.1071/ASEG2018ABW8_4F
%U https://www.publish.csiro.au/paper/ASEG2018ABW8_4F 
%X Vertical seismic profiling (VSP) is commonly used in the oil and gas industry for better subsurface imaging and characterisation, as well as for providing depth calibration for surface seismic. The use of VSP in mineral exploration and mine planning is not very common mostly due to the small diameter and stability of the boreholes, as well as the relatively high cost of such surveys. These issues can be mitigated by using cheap and potentially disposable borehole sensors, such as fibre-optic cables utilised in distributed acoustic sensing (DAS). The questions we want to answer in this work are how the quality of DAS data compares to other types of borehole measurements and what are the operational benefits and constraints for the use of this technology in mineral exploration settings. To this end, we have tested performance of DAS measurements in one of the boreholes of the Mineral Systems Drilling Program in South Australia and compared them to hydrophone measurements. The DAS measurements provide data quality that is much better than a hydrophone string, in particular it has consistent amplitudes at different depths, shows less cable and tube waves, and the reflections are much clearer. The acquisition of DAS data is quicker than any other borehole measurements that require multiple pulls of the receivers. The reduction of the acquisition time increases with the depth of the borehole. This case study demonstrates that DAS measurements show big potential for mineral exploration and exploitation. 
