
TY  - JOUR
A1  - Sattel, Daniel 
A1  - Mutton, Paul 
T1  - The superparamagnetic response of transient AEM data
JF  - ASEG Extended Abstracts
JO  - ASEG Extended Abstracts
Y1  - 2015
VL  - 2015
IS  - 1
SP  - 1
EP  - 6
KW  - 
UR  - https://doi.org/10.1071/ASEG2015AB100 
N2  - Several lines of VTEM data flown at different system elevations across a known sulphide body and surface cover with elevated superparamagnetic (SPM) properties were analysed with MAXWELL, layered-earth inversions, LEROIAIR and LEROI. The SPM material was modelled with frequency-dependent magnetic susceptibilities at shallow depth. Due to their slow late-time decay, SPM responses can be confused with responses of deep conductors and vice versa. Depending on the parameter weighting used, 1D inversions model all late-time responses as deep conductive material or as surficial SPM material. However, the joint 1D inversion of data acquired at different system elevations manages to recover a deep conductor from the sulphide anomaly and elevated SPM values at the location of the SPM response. For the modelled parameters, the VTEM data sets from two elevations (at 70 and 80 m) require a vertical separation of about 10 m to allow for the discrimination between the SPM and sulphide responses. For lower system elevations, less sensor separation is necessary due to the strong gradient of the SPM response. We suggest that two vertically separated receivers could be used to measure the AEM gradient and depending on the flying height of the transmitter, the vertical offset of the receivers should be between 2 and 40 m. 
ER  -

