
%0 Journal Article
%A Tchen, T. 
%A Eisler, P. 
%T Accurate borehole probe calibration
%J Exploration Geophysics
%D 1992/06/01
%V 23
%N 2
%P 343-352
%K 
%R https://doi.org/10.1071/EG992343
%U https://www.publish.csiro.au/paper/EG992343 
%X The In Situ Minerals Analysis Group in the CSlRO Division of Geomechanics has developed quantitative borehole logging techniques applicable to iron-ore and coal deposits. They are used currently to determine the formation density, either the iron-ore grades or the raw coal-ash contents, as appropriate, and the borehole diameter. The in-situ analyses depend on probe-calibration equations which were formulated by linear regression analysis that related the probe's spectral outputs with the required geological variables. Calibration equations consisting of a linear combination of first-order terms gave excellent assaying accuracy. The group achieved further improvements in assaying accuracy by developing a more generalised calibration model based on second-order terms and cross-product terms of the probe's spectral parameters. The logging data used for the statistical analysis were recorded in mine development boreholes at three Pilbara iron-ore mines and at a Queensland coal mine. Application of the generalised model, in place of the first-order model, resulted in a reduction of the root mean square (RMS) deviation between assays obtained in the laboratory and by logging, of about 15% relative for iron-ore grades and of about 8% relative for raw coal-ash content. The study also shows that the accuracy obtained using the conventional, non-spectrometric calibration model is inferior to that obtained by using either of the two spectrometric models, where the comparisons made are based on the same set of logging data. 
