Register      Login
Exploration Geophysics Exploration Geophysics Society
Journal of the Australian Society of Exploration Geophysicists
RESEARCH ARTICLE

Using reverse vertical seismic profiling (RVSP) to characterise the subsurface fracture system of the Seokmo Island geothermal field, Republic of Korea

Bona Kim 1 Joongmoo Byun 1 3 Soon Jee Seol 1 Kwon Gyu Park 2 Tae Jong Lee 2
+ Author Affiliations
- Author Affiliations

1 Department of Natural Resources and Geoenvironmental Engineering, Hanyang University, Haengdang 1-dong, Seongdong-gu, Seoul 133-791, Korea.

2 Korea Institute of Geoscience and Mineral Resources, 124 Gwahang-no, Yuseong-gu, Daejeon 305-350, Korea.

3 Corresponding author. Email: jbyun@hanyang.ac.kr

Exploration Geophysics 44(3) 167-175 https://doi.org/10.1071/EG13049
Submitted: 16 May 2013  Accepted: 22 May 2013   Published: 25 June 2013
Originally submitted to KSEG 18 October 2012, accepted 22 April 2013  

Abstract

This paper presents a case study of fracture-system interpretation using reverse vertical seismic profiling (RVSP) with seismic reflection, refraction, and borehole televiewer data on Seokmo Island, South Korea. We first extracted fracture locations from a pre-existing image obtained by prestack phase-screen migration of RVSP data, and the strike and dip of each fracture from the borehole televiewer data. We established an initial velocity model using this fracture information and then generated synthetic common-receiver gather data through forward simulation. However, the synthetic data could not sufficiently reflect the characteristics of the field data. To resolve this problem, we added an upper alluvial layer, observed in the surface reflection and refraction data, to the velocity model. To improve the quality of the migrated image of the RVSP field data and the velocity model, we not only reprocessed the RVSP data, but also applied prestack generalized-screen migration, which is more accurate than phase-screen migration in computing steep fractures. The new synthetic data generated from the improved velocity model agreed well with the RVSP field data. As a result, we could describe a markedly improved subsurface structure including fracture locations. The workflow suggested in this study will be helpful for imaging fracture systems in oil and gas reservoirs as well as in geothermal reservoirs.

Key words: fracture, geothermal, imaging, RVSP.


References

Batini, F., Omnes, G., and Renoux, P., 1990, Delineation of geothermal reservoirs with 3-D surface seismic and multi-offset WSPS in the Larderello area: Geothermal Resources Council Transactions, 14, 1381–1386

Cameli, G. M., Batini, F., Dini, I., Lee, J. M., Gibson Jr, R. L., and Toksöz, M. N., 1995, Seismic delineation of a geothermal reservoir in the Monteverdi area from VSP data: Proceedings of the World Geothermal Congress, 18–31 May 1995, Florence, Italy, 2, 821–826.

Chen, S. T., Zimmerman, L. J., and Tugnait, J. K., 1990, Subsurface imaging using reversed vertical seismic profiling and crosshole tomographic methods: Geophysics, 55, 1478–1487
Subsurface imaging using reversed vertical seismic profiling and crosshole tomographic methods:Crossref | GoogleScholarGoogle Scholar |

Cosma, C., Heikkinen, P., Keskinen, J., and Enescu, N., 2001, VSP in crystalline rocks—from downhole velocity profiling to 3-D fracture mapping: International Journal of Rock Mechanics and Mining Sciences, 38, 843–850
VSP in crystalline rocks—from downhole velocity profiling to 3-D fracture mapping:Crossref | GoogleScholarGoogle Scholar |

Gibson Jr, R. L., Lee, J. M., Toksöz, M. N., Dini, I., and Cameli, G. M., 1995, Three-dimensional Kirchhoff migration analysis of VSP data from a geothermal field: Proceedings of the World Geothermal Congress, 18–31 May 1995, Florence, Italy, 2, 821–826.

Gritto, R., Daley, T. M., and Majer, E. L., 2002, Intergrated seismic studies at the Rye Patch geothermal reservoir: Lawrence Berkeley National Laboratory.

Han, B., Seol, S. J., and Byun, J., 2012, Elastic modelling in tilted transversely isotropic media with convolutional perfectly matched layer boundary conditions: Exploration Geophysics, 43, 77–86
Elastic modelling in tilted transversely isotropic media with convolutional perfectly matched layer boundary conditions:Crossref | GoogleScholarGoogle Scholar |

Hardage, B., 2000, Vertical seismic profiling: principles: Elsevier Science Publications Co., Inc.

Hwang, J. H. and Kim, Y. H., 2005, Geological mapping research for Ganghwa-Onsuri, Uijeongbu, and Pochen quadrangles (1 : 50,000): Korea Institute of Geoscience and Mineral Resources, 25.

Le Rousseau, J. H., and de Hoop, M. V., 2001, Modeling and imaging with the scalar generalized-screen algorithms in isotropic media: Geophysics, 66, 1551–1568
Modeling and imaging with the scalar generalized-screen algorithms in isotropic media:Crossref | GoogleScholarGoogle Scholar |

Lee, S.-G., Kim, T.-K., Lee, J.-S., and Song, Y.-H., 2006, Rb-Sr isotope geochemistry in Seokmodo granitoids and hot spring, Gangwha: an application of Sr isotope for clarifying the source of hot spring: The Journal of the Petrological Society of Korea, 15, 06–71

Lee, T. J., Han, N., and Song, Y., 2010a, Magnetotelluric survey applied to geothermal exploration: an example at Seokmo Island, Korea: Exploration Geophysics, 41, 61–68
Magnetotelluric survey applied to geothermal exploration: an example at Seokmo Island, Korea:Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BC3cXit1Gqur8%3D&md5=56fad8742c8db4e0306a074edc0e8035CAS |

Lee, T. J., Song, Y., Park, D.-W., Lee, S. K., Lee, C., Lee, Y. M., Lee, S. K., Park, C. H., Kim, H. C., Park, I. H., Shim, B. O., Lee, Y. S., Hwang, S., Park, K. G., Lee, S.-G., Kim, T.-K., Yoon, Y. Y., Lee, C. B., Kim, C. C., Park, J. M., Choi, J., and Lee, C. H., 2010b, Development of geothermal resources for combined heat and power generation: Korea Institute of Geoscience and Mineral Resources, GP2009–016–2011(3), Ministry of Knowledge Economy, Republic of Korea, 64–72.

Lee, S., Byun, J., Song, H., Park, K. G., and Lee, T. J., 2011, Imaging fractures by using VSP data on geothermal site: Geophysics and Geophysical Exploration, 14, 227–233

Majer, E. L., McEvilly, T. V., Eastwood, F. S., and Mayer, L. R., 1988, Fracture detection using P-wave and S-wave vertical seismic profiling at the Geysers: Geophysics, 53, 76–84
Fracture detection using P-wave and S-wave vertical seismic profiling at the Geysers:Crossref | GoogleScholarGoogle Scholar |

Matsushima, J., Okubo, Y., Rokugawa, S., Yokota, T., Tanaka, K., Tsuchiya, T., and Narita, N., 2003, Seismic reflector imaging by prestack time migration in the Kakkonda geothermal field, Japan: Geothermics, 32, 79–99
Seismic reflector imaging by prestack time migration in the Kakkonda geothermal field, Japan:Crossref | GoogleScholarGoogle Scholar |

Nakagome, O., Uchida, T., and Horikoshi, T., 1998, Seismic reflection and VSP in the Kakkonda geothermal field, Japan: fractured reservoir characterization: Geothermics, 27, 535–552
Seismic reflection and VSP in the Kakkonda geothermal field, Japan: fractured reservoir characterization:Crossref | GoogleScholarGoogle Scholar |

New Energy Development Organization (NEDO), 1990, Summary of Report. Confirmation study of the effectiveness of prospecting techniques for deep geothermal resources. Development of exploration methods for fractured-type geothermal reservoirs (development of exploration methods): NEDO, Tokyo, Japan, 102–105 (in Japanese with English abstract).

Rogers, S., Cosma, C., Shiner, P., Emsley, S., and Enescu, N., 2006, VSP fracture imaging to bridge the well-to-seismic scale gap for a fractured carbonate reservoir: First Break, 24, 77–83

Taylor, S., Malin, P., and Haldorsen, J., 2005, Shear wave anisotropy observed in VSP data at the San Andreas fault observatory at depth: SEG Technical Program Expanded Abstracts, 2005, 174–177
Shear wave anisotropy observed in VSP data at the San Andreas fault observatory at depth:Crossref | GoogleScholarGoogle Scholar |