Marine seismic profiling and shallow marine sand resistivity investigations in Broken Bay, NSW, Australia*
Julian Vrbancich 1 4 Robert J. Whiteley 2 Peter Caffi 2 Don W. Emerson 31 Defence Science and Technology Organisation (DSTO), 13 Garden St, Eveleigh, NSW 2015, Australia.
2 Coffey Geotechnics Pty Limited, 8/12 Mars Rd, Lane Cove West, NSW 2066, Australia.
3 Systems Exploration (NSW) Pty Ltd, Box 6001, Dural Delivery Centre, NSW 2158, Australia.
4 Corresponding author. Email: julian.vrbancich@dsto.defence.gov.au
Exploration Geophysics 42(4) 227-238 https://doi.org/10.1071/EG11031
Submitted: 15 June 2011 Accepted: 19 October 2011 Published: 22 November 2011
Abstract
A marine continuous seismic profiling (CSP) study and a resistivity study of vibrocore samples of shallow marine sands were undertaken in Broken Bay, NSW, Australia, to characterise the seabed. The overall aims were to provide an estimate of the sediment thickness using CSP and an estimate of sediment resistivity in the upper 4 m of the seabed at selected sites. This information can provide a simplified geo-electrical model to assess the accuracy of interpreted seabed and bedrock depths obtained independently from AEM data and to assist the calibration of AEM instrumentation for bathymetric surveys. The acoustic impedance contrast between deeper sediments and the anticipated basement sandstone was variable suggesting irregularly layered sediments. These sediments contained very dense (tightly packed) sands, owing to marine regression and transgression of sea level, and variably weathered underlying sandstones. Interpreted bedrock levels vary considerably across the survey area and represent drowned river valleys of the inner continental shelf. A broad deep channel representing a high-energy palaeo-fluvial drainage system in the Hawkesbury River outreaches was identified; it extended to approximately –80 m AHD. Another area revealed a dendritic fluvial pattern extending to approximately –70 m AHD. A moderately narrow palaeovalley extending to –90 m AHD either side of the Palm Beach tombolo was clearly identified. This same feature was also clearly identified from airborne electromagnetic data which, when interpreted, showed very good agreement with seismic depths. Sand samples from 17 sites were obtained from vibrocores with a penetration depth of 4.5 m. The laboratory resistivity values, obtained from four-electrode measurements on 64 seawater saturated subsamples ranged from 1.3 to 0.6 Ω m (20°C); 0.92 Ω m average. Inter- and intra-site changes in composition (shell/sand), grain packing, grain size, grain shape, cohesion, and inferred porosity were thought to be responsible for minor variations in resistivity. Archie Equation plots showed some scatter, but the data indicate a cementation factor of ~1.6 and an average formation factor of 4.2 for the suites of sands. These values are consistent with values cited in the literature for similar lithologies.
Key words: AEM, bedrock topography, Broken Bay, marine seismic, sediment resistivity.
References
Albani, A. D., 1974, Sedimentary environments in Broken Bay, NSW: Journal of the Geological Society of Australia, 21, 279–290| Sedimentary environments in Broken Bay, NSW:Crossref | GoogleScholarGoogle Scholar |
Albani, A. D., and Johnson, B. D., 1974, The bedrock topography and origin of Broken Bay, NSW: Journal of the Geological Society of Australia, 21, 209–214
Albani, A. D., Tayton, J. W., Rickwood, P. C., Gordon, A. D., and Hoffman, J. G., 1988, Cainozoic morphology of the inner continental shelf near Sydney, NSW: Journal and Proceedings of the Royal Society of New South Wales, 121, 11–28
Albani, A. D., Rickwood, P. C., Nielson, L., and Lord, D., 1991, Geological and hydrodynamic conditions in Broken Bay, New South Wales: Technical Contribution, No. 1, Centre for Marine Science, University of New South Wales.
Archie, G. E., 1942, The electrical resistivity log as an aid in determining some resevoir characteristics: Transactions AIME, 146, 54–62
Arps, J. J., 1953, The effect of temperature on the density and electrical resistivity of sodium chloride solutions: Journal of Petroleum Technology, 1, 17–20
Bennet, R. H., Lambert, D. N., Hulbert, M. H., Burns, J. T., Sawyer, W. B., and Freeland, G. L., 1983, Electrical resistivity/conductivity in seabed sediments, in R. A. Geyer, ed., CRC handbook of geophysical exploration at sea: CRC Press Inc., 333–375.
Biella, G., Lozej, A., and Tabacco, I., 1983, Experimental study of some hydrogeophysical properties of unconsolidated porous sediments: Ground Water, 21, 741–751
| Experimental study of some hydrogeophysical properties of unconsolidated porous sediments:Crossref | GoogleScholarGoogle Scholar |
Emerson, D. W., 2000, Magnetic susceptibility in sedimentary basin studies – some features of the Hawkesbury Sandstone: Preview, 87, 35–38
Evans, R. L., 2007, Using CSEM techniques to map the shallow section of seafloor: from the coastline to the edges of the continental slope: Geophysics, 72, WA105–WA116
| Using CSEM techniques to map the shallow section of seafloor: from the coastline to the edges of the continental slope:Crossref | GoogleScholarGoogle Scholar |
Fofonoff, N.P., and Millard Jr., R.C., 1983, Algorithms for computation of fundamental properties of seawater: UNESCO Technical Papers in Marine Science, No. 44.
Glover, P., 2009, What is the cementation exponent? A new interpretation: The Leading Edge, 28, 82–85
| What is the cementation exponent? A new interpretation:Crossref | GoogleScholarGoogle Scholar |
Greenhalgh, 1972, unpublished; refer to Acknowledgements.
Hughes, M. G., Harris, P. T., and Hubble, T. C. T., 1998, Dynamics of the turbidity maximum zone in a micro-tidal estuary: Hawkesbury River, Australia: Sedimentology, 45, 397–410
| Dynamics of the turbidity maximum zone in a micro-tidal estuary: Hawkesbury River, Australia:Crossref | GoogleScholarGoogle Scholar |
Jackson, P. D., Taylor Smith, D., and Stanford, P. N., 1978, Resistivity-porosity-particle shape relationships for marine sands: Geophysics, 43, 1250–1268
| Resistivity-porosity-particle shape relationships for marine sands:Crossref | GoogleScholarGoogle Scholar |
Kermabon, A., Gehin, C., and Blavier, P., 1969, A deep-sea electrical resistivity probe for measuring porosity and density of unconsolidated sediments: Geophysics, 34, 554–571
| A deep-sea electrical resistivity probe for measuring porosity and density of unconsolidated sediments:Crossref | GoogleScholarGoogle Scholar |
Merrick, N. P., and Greenhalgh, S. A., 1990, The use of anomaly offset in solving hidden layer refraction problems: Geoexploration, 26, 181–190
| The use of anomaly offset in solving hidden layer refraction problems:Crossref | GoogleScholarGoogle Scholar |
Roy, P. S., 1983, Quaternary geology, in C. Herbert, ed., Geology of the Sydney 1 : 100000 Sheet 9130: Geological Survey of New South Wales, 41–91.
Taylor-Smith, D., 1971, Acoustic and electric techniques for sea-floor sediment identification: Proceedings of the International Symposium on Engineering Properties of the Sea-Floor and their Geophysical Identification, Seattle, Washington, 253–267.
Vrbancich, J., 2009, An investigation of seawater and sediment depth using a prototype airborne electromagnetic instrumentation system – a case study in Broken Bay, Australia: Geophysical Prospecting, 57, 633–651
| An investigation of seawater and sediment depth using a prototype airborne electromagnetic instrumentation system – a case study in Broken Bay, Australia:Crossref | GoogleScholarGoogle Scholar |
Vrbancich, J., and Fullagar, P. K., 2007, Towards remote sensing of sediment thickness and depth to bedrock in shallow seawater using airborne TEM: Exploration Geophysics, 38, 77–88
| Towards remote sensing of sediment thickness and depth to bedrock in shallow seawater using airborne TEM:Crossref | GoogleScholarGoogle Scholar |
Vrbancich, J., Whiteley, R. J., and Emerson, D. W., 2011, Marine seismic profiling and shallow marine sand resistivity investigations in Jervis Bay, NSW, Australia: Exploration Geophysics, 42, 127–138
| Marine seismic profiling and shallow marine sand resistivity investigations in Jervis Bay, NSW, Australia:Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BC3MXotVelsLg%3D&md5=f76984aae1dc283581cdbac829430d84CAS |
Whiteley, R. J., and Stewart, S. B., 2008, Case studies of shallow marine investigations in Australia with advanced underwater seismic refraction (USR): Exploration Geophysics, 39, 34–40
| Case studies of shallow marine investigations in Australia with advanced underwater seismic refraction (USR):Crossref | GoogleScholarGoogle Scholar |