Geothermal energy: shallow sources

Abstract

Below a depth of around 5 to 8 metres below the surface, the ground displays a temperature which is effectively constant and a degree or two above the weighted mean annual air temperature at that particular location. In Melbourne, the ground temperature at this depth is around 18°C with temperatures at shallower depths varying according the season. Further north, these constant temperatures increase a little; while for more southern latitudes, the temperatures are a few degrees cooler. Shallow source geothermal energy (also referred to as direct geothermal energy, ground energy using ground source heat pumps and geoexchange) uses the ground and its temperatures to depths of a few tens of metres as a heat source in winter and a heat sink in summer for heating and cooling buildings. Fluid (usually water) is circulated through a ground heat exchanger (or GHE, which comprises pipes built into building foundations, or in specifically drilled boreholes or trenches), and back to the surface. In heating mode, heat contained in the circulating fluid is extracted by a ground source heat pump (GSHP) and used to heat the building. The cooled fluid is reinjected into the ground loops to heat up again to complete the cycle. In cooling mode, the system is reversed with heat taken out of the building transferred to the fluid which is injected underground to dump the extra heat to the ground. The cooled fluid then returns to the heat pump to receive more heat from the building.